Találati lista | Tudóstér

001-es BibID:	BIBFORM043254
Első szerző:	Budai István (folyamatmérnök)
Cím:	Development of a mixer to fabricate particle stabilized aluminium matrix emulsions and monotectic alloys / Budai, I.
Dátum:	2012
ISSN:	0933-5137
Megjegyzések:	Aluminum matrix monotectic alloys with a homogeneous distribution of the second phase dropletscan be obtained in large ingots, if the droplets are stabilized by solid particles of optimizedwettability at the interface of the two, immiscible liquid metals. In this paper, Al-matrix emulsionswith Cd-rich droplets, stabilized by Al4Sr intermetallic particles are prepared, based onour previous paper. The new information in the present paper is the development of a new typeof a mixer, allowing increased rotational speed, and hence, more efficient emulsification withoutthe danger of mixing the liquid metals out of the crucible. As the comparative experimentsproved, the ratio of emulsified Cd-rich liquid was found to increase considerably when the oldmixer was replaced by the new one. Particularly, there is no 1-phase Cd-rich sedimentationfound at the bottom of the crucible when the mixer of the new design is applied.
Tárgyszavak:	Műszaki tudományok Anyagtudományok és technológiák idegen nyelvű folyóiratközlemény külföldi lapban monotectic alloys aluminium cadmium emulsification mixer
Megjelenés:	Materialwissenschaft und Werkstofftechnik. - 43 : 4 (2012), p. 345-349. -
Internet cím:	Szerző által megadott URL DOI Intézményi repozitóriumban (DEA) tárolt változat
Borító:
Saját polcon: