Találati lista | Tudóstér

001-es BibID:	BIBFORM114415
035-os BibID:	(scopus)85165665880 (wos)001037011600032 (cikkazonosító)11985
Első szerző:	Csámer Lóránd (mérnök)
Cím:	Custom-made 3D printing-based cranioplasty using a silicone mould and PMMA / Csámer Loránd, Csernátony Zoltán, Novák László, Kővári Viktor Zsolt, Kovács Ágnes Éva, Soósné Horváth Hajnalka, Manó, Sándor
Dátum:	2023
ISSN:	2045-2322
Megjegyzések:	All types of cranioplasty techniques restore the morphology of the skull and affect patient aesthetics. Safe and easy techniques are required to enhance patients' recovery and the rehabilitation process. We propose a new method of cranioplasty. The 3-dimensional (3D) reconstruction of a thin-layer computed tomography (CT) scan of the skull was used to reflect the intact side onto the defect and subtract the overlapping points from one another. In this way, a 3D model of the planned implant can be built in the required shape and size. The precise fit of the implant can be checked by printing the defective part of the skull in case it can be modified. A sterilisable silicone mould based on the finalized model was created afterwards. Polymethyl methacrylate implants were prepared directly in an aseptic environment in the operating room during surgery. Between 2005 and 2020, we performed 54 cranioplasties on 52 patients whose craniotomies were performed previously for indications of traumatic brain injury, stroke or tumour surgeries. No technical problems were noted during the operations. In 2 cases, septic complications that occurred were not connected to the technique itself, and the implants were removed and later replaced. Our proposed technique based on 3D-printed individual silicone moulds is a reliable, safe, easily reproducible and low-cost method to repair different skull defects.
Tárgyszavak:	Orvostudományok Klinikai orvostudományok idegen nyelvű folyóiratközlemény külföldi lapban folyóiratcikk
Megjelenés:	Scientific Reports. - 13 : 1 (2023), p. 1-15. -
További szerzők:	Csernátony Zoltán (1959-2023) (ortopéd sebész, traumatológus) Novák László (1964-) (idegsebész) Kővári Viktor Zsolt (1979-) (idegsebész) Kovács Ágnes Éva (1993-) (mérnök) Soósné Horváth Hajnalka (1982-) (mérnök) Manó Sándor (1977-) (gépészmérnök, számítógépes tervezőmérnök)
Pályázati támogatás:	OTKA-113180 OTKA GINOP-2.3.2-15-2016-00022 GINOP
Internet cím:	Szerző által megadott URL DOI Intézményi repozitóriumban (DEA) tárolt változat
Borító:
Saját polcon: