CCL

Összesen 3 találat.
#/oldal:
Részletezés:
Rendezés:

1.

001-es BibID:BIBFORM066981
Első szerző:Deák Krisztián (gépészmérnök)
Cím:Optimal Wavelet Selection for the Size Estimation of Manufacturing Defects of Tapered Roller Bearings with Vibration Measurement using Shannon Entropy Criteria / Krisztián Deák, Tamás Mankovits, Imre Kocsis
Dátum:2017
ISSN:0039-2480
Megjegyzések:Fault diagnosis of bearings is essential in manufacturing to increase quality. Traditionally, fault diagnosis of tapered roller element bearings is performed by signal processing methods, which handle the nonstationary behaviour of the signal. The wavelet transform is an efficient tool for analysing the vibration signal of the bearings because it can detect the sudden changes and transient impulses in the signal caused by faults in the bearing elements. In this article, manufacturing faults on the outer ring of tapered roller bearings due to the grinding process in manufacturing are investigated. Nine different real values wavelets (Symlet-2, Symlet-5, Symlet-8, db02, db06, db10, db14, Meyer, and Morlet) are compared according to the Energy-to-Shannon-Entropy ratio criteria, and which is efficient for detecting the manufacturing faults is determined. Finally, experiments are carried out on a test rig for determining the geometrical size of the manufacturing faults with all wavelets directly from the vibration signature the result of db02, Symlet-5, and Morlet wavelets are presented. When modelling the bearing structure as an under-damped second-order mass-spring-damper mechanical system, its unit impulse response function is compared to the wavelets on the basis of their Energy-to-Shannon-Entropy ratio to determine the fault size from the vibration signal. The proposed technique has been successfully implemented for measuring defect widths. The maximum deviation in result has been found to be 4.12 % for the defect width which was verified with image analysis methods using an optical microscope and contact measurement.
Tárgyszavak:Műszaki tudományok Gépészeti tudományok idegen nyelvű folyóiratközlemény külföldi lapban
folyóiratcikk
Megjelenés:Strojniski Vestnik-Journal of Mechanical Engineering. - 63 : 1 (2017), p. 3-14. -
További szerzők:Mankovits Tamás (1981-) (gépészmérnök) Kocsis Imre (1969-) (matematikus, gépészmérnök)
Internet cím:DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

2.

001-es BibID:BIBFORM072451
Első szerző:Mankovits Tamás (gépészmérnök)
Cím:Compressive Response Determination of Closed-Cell Aluminium Foam and Linear-Elastic Finite Element Simulation of ųCT-Based Directly Reconstructed Geometrical Models / Tamás Mankovits, Tamás Antal Varga, Sándor Manó, Imre Kocsis
Dátum:2018
ISSN:0039-2480
Tárgyszavak:Műszaki tudományok Gépészeti tudományok idegen nyelvű folyóiratközlemény külföldi lapban
Megjelenés:Strojniski Vestnik-Journal of Mechanical Engineering. - 64 : 2 (2018), p. 105-113. -
További szerzők:Varga Tamás Antal (1993-) (gépészmérnök) Manó Sándor (1977-) (gépészmérnök, számítógépes tervezőmérnök) Kocsis Imre (1969-) (matematikus, gépészmérnök)
Internet cím:DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

3.

001-es BibID:BIBFORM051399
Első szerző:Mankovits Tamás (gépészmérnök)
Cím:Optimization of the Shape of Axi-Symmetric Rubber Bumpers / Mankovits Tamás, Szabó Tamás, Kocsis Imre, Páczelt István
Dátum:2014
ISSN:0039-2480
Tárgyszavak:Műszaki tudományok Gépészeti tudományok idegen nyelvű folyóiratközlemény külföldi lapban
Megjelenés:Strojniski Vestnik-Journal Of Mechanical Engineering. - 60 : 1 (2014), p. 61-71. -
További szerzők:Szabó Tamás Kocsis Imre (1969-) (matematikus, gépészmérnök) Páczelt István
Internet cím:Intézményi repozitóriumban (DEA) tárolt változat
Borító:
Rekordok letöltése1