CCL

Összesen 6 találat.
#/oldal:
Részletezés:
Rendezés:

1.

001-es BibID:BIBFORM055357
Első szerző:Kalmár Ferenc (gépészmérnök)
Cím:Impact of Building Refurbishment on the Operative Temperature and PMV / Ferenc Kalmár, Tünde Kalmár
Dátum:2014
ISSN:1022-6680 1662-8985
Megjegyzések:Energy saving is one of the main priorities in the building sector. In the last years inHungary different national programs were launched in order to improve the thermal properties ofresidential buildings. In case of building refurbishment 40-60% heating energy savings wereexpected. There were cases when the expected energy savings have not been met. The aim of thisresearch was to see which the refurbishment impact is on the thermal comfort in a residentialbuilding. It was found the mean radiant temperature, the operative temperature and the predictedmean vote (PMV) decrease after building refurbishment.
Tárgyszavak:Műszaki tudományok Gépészeti tudományok idegen nyelvű folyóiratközlemény külföldi lapban
Building Refurbishment
Operative Temperature
PMV
Thermal Comfort
Megjelenés:Advanced Materials Research. - 1041 (2014), p. 329-332. -
További szerzők:Kalmár Tünde (1978-) (gépészmérnök)
Internet cím:Intézményi repozitóriumban (DEA) tárolt változat
DOI
Borító:

2.

001-es BibID:BIBFORM050096
Első szerző:Kalmár Ferenc (gépészmérnök)
Cím:Exergy quality of buildings / Kalmár Ferenc
Dátum:2014
ISSN:1662-8985
Tárgyszavak:Műszaki tudományok Gépészeti tudományok idegen nyelvű folyóiratközlemény külföldi lapban
Megjelenés:Advanced Materials Research. - 899 (2014), p. 30-35. -
Pályázati támogatás:TÁMOP-4.2.2.A-11/1/KONV-2012-0041
TÁMOP
Internet cím:Intézményi repozitóriumban (DEA) tárolt változat
Borító:

3.

001-es BibID:BIBFORM054185
Első szerző:Lakatos Ákos (fizikus, környezetmérnök, létesítménymérnök)
Cím:Measurements of Thermal Properties of Different Building Materials / Lakatos, Ákos
Dátum:2014
ISSN:1662-8985
Megjegyzések:In this paper we present measurements and measurement methods carried out on construction and building materials in our Building Physics laboratory in University of Debrecen, Faculty of Engineering, Hungary. The investigations with different methods are so significant from the point of view of thermal sizing and designing of the buildings. The laboratory measurements of the thermal properties of materials and in-built structures are very important either for the manufacturers or the designers. In this communication the measurement result are presented. Thermal conductivities will be calculated after steady state thermal resistance measurements both from Calibration hot box (CC) and Heat Flux measurements carried out by Hukseflux (HF) apparatus. Calorific values of some insulating materials will be presented after combusting them in a CAL2K ECO type bomb calorimeter.
Tárgyszavak:Műszaki tudományok Anyagtudományok és technológiák idegen nyelvű folyóiratközlemény külföldi lapban
Thermal conductivity
hot box method
hukseflux
Megjelenés:Advanced Materials Research. - 1016 : 1 (2014), p. 733-737. -
Pályázati támogatás:TÁMOP-4.2.2.A-11/1/KONV-2012-0041
TÁMOP
Internet cím:DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

4.

001-es BibID:BIBFORM050100
Első szerző:Lakatos Ákos (fizikus, környezetmérnök, létesítménymérnök)
Cím:Comparison of the Thermal Properties of Different Insulating Materials / Lakatos, Ákos
Dátum:2014
ISSN:1662-8985
Megjegyzések:Currently thermal insulating of the buildings is sorely needed from the point of view ofenergy as well as money savings. It is important to highlight that the most commonly usedinsulation materials in the building sector are the expanded polystyrene (EPS), the extrudedpolystyrene (XPS) and the fibrous (mineral, rock) ones. In this communication we confront 6different insulating materials slabs (EPS 30, 100, 150, 200, a yellow XPS and a mineral wool bytheir thermal properties. Therefore two types of hypothetic building structures were created andwere insulated with the above presented materials from 0.01 m to 0.3 m thicknesses. For thecalculations the thermal conductivity of each sample was determined using a Holometrix 2000(HLS) heat flow meter. As a result their heat transfer coefficients, delaying abilities, energy storingcapabilities and thermal diffusion coefficients were confronted. Besides a material constant hadbeen defined and was paired with the measured thermal conductivity.
Tárgyszavak:Műszaki tudományok Anyagtudományok és technológiák idegen nyelvű folyóiratközlemény külföldi lapban
Megjelenés:Advanced Materials Research. - 899 (2014), p. 381-386. -
Pályázati támogatás:TÁMOP 4.2.4. A/2-11-1-2012-0001
TÁMOP
Internet cím:DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

5.

001-es BibID:BIBFORM097317
Első szerző:Zöld András (gépészmérnök, épületgépész)
Cím:Photovoltaic Arrays on Flat Roofs - An Aspect of Yearly Energy Production / András Zöld, Márta Seprődi-Egeresi
Dátum:2014
ISSN:1022-6680 1662-8985
Tárgyszavak:Műszaki tudományok Gépészeti tudományok idegen nyelvű folyóiratközlemény külföldi lapban
folyóiratcikk
Megjelenés:Advanced Materials Research. - 899 (2014), p. 222-227. -
További szerzők:Seprődi-Egeresi Márta
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

6.

001-es BibID:BIBFORM097315
Első szerző:Zöld András (gépészmérnök, épületgépész)
Cím:Nearly Zero-Energy Requirements and the Reference Buildings / András Zöld, Zsuzsa Szalay
Dátum:2014
ISSN:1022-6680 1662-8985
Tárgyszavak:Műszaki tudományok Gépészeti tudományok idegen nyelvű folyóiratközlemény külföldi lapban
folyóiratcikk
Megjelenés:Advanced Materials Research. - 899 (2014), p. 52-57. -
További szerzők:Szalay Zsuzsa (építészmérnök)
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:
Rekordok letöltése1