CCL

Összesen 39 találat.
#/oldal:
Részletezés:
Rendezés:

1.

001-es BibID:BIBFORM040310
Első szerző:Bakó József (vegyész)
Cím:Synthesis of biocompatible nanocomposite hydrogels as a local drug delivery system / Jozsef Bako, Marta Szepesi, Adrienn J. Veres, Csaba Cserhati, Zsuzsa M. Borbely, Csaba Hegedus, Janos Borbely
Dátum:2008
ISSN:0303-402X
Tárgyszavak:Orvostudományok Klinikai orvostudományok idegen nyelvű folyóiratközlemény külföldi lapban
Megjelenés:Colloid And Polymer Science. - 286 : 3 (2008), p. 357-363. -
További szerzők:Szepesi Márta (1976-) (fogszakorvos) Veres Adrienn J. (biofizikus) Cserháti Csaba (1963-) (fizikus) Borbély Zsuzsa M. Hegedűs Csaba (1953-) (fogszakorvos) Borbély János (1950-) (vegyész)
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

2.

001-es BibID:BIBFORM084825
Első szerző:Beck Mihály (kémikus)
Cím:Surface modification of activated carbon and fullerene black by Diels-Alder reaction / T. Beck Mihály, Mándy Géza, Papp Szilvia, Dékány Imre
Dátum:2004
ISSN:0303-402X
Tárgyszavak:Természettudományok Fizikai tudományok idegen nyelvű folyóiratközlemény külföldi lapban
folyóiratcikk
Megjelenés:Colloid And Polymer Science. - 283 : 3 (2004), p. 237-242. -
További szerzők:Mándy Géza Papp Szilvia Dékány Imre
Pályázati támogatás:T02522
OTKA
T033004
OTKA
M36688
OTKA
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

3.

001-es BibID:BIBFORM008968
Első szerző:Bodnár Magdolna
Cím:Preparation and characterization of cross-linked hyaluronan nanoparticles / Magdolna Bodnár, Lajos Daróczi, Gyula Batta, József Bakó, John F. Hartmann, János Borbély
Dátum:2009
Megjegyzések:The present investigation describes the synthesis and characterization of novel biodegradable nanoparticles based on hyaluronic acid (HA). The diamine, 2,2·(ethylenedioxy) bis(ethylamine) was used for cross-linking of the HA linear chains. The condensation reaction of amino groups and pendant carboxyl groups of HA was performed in aqueous media at room temperature using water-soluble carbodiimide. The prepared nanosystems, aqueous solutions, or dispersions of nanoparticles were stable, transparent, or mildly opalescent systems depending on the ratio of cross-linking, findings consistent with values of transmittance above 77%. The structure of products was determined by nuclear magnetic resonance spectroscopy, and the particle size was identified by laser light scattering (DLS) and transmission electron microscopy (TEM) measurements. Particle size measured by TEM varied less than 130 nm; in the swollen state, the average size of the particles measured by DLS was in the range of 30-140 nm depending on the ratio of cross-linking and the molecular weight of HA. Formation of cross-linked nanoparticles results in a viscosity drop compared to the viscosity of the corresponding solution of the HA, and this trend becomes decreasingly appreciable as the molecular weight of HA decreases.
Tárgyszavak:Természettudományok Kémiai tudományok idegen nyelvű folyóiratközlemény külföldi lapban
Molekulatudomány
Hyaluronic acid
Nanoparticles
Cross-linking
Megjelenés:Colloid and Polymer Science. - 287 : 8 (2009), p. 991-1000. -
További szerzők:Daróczi Lajos (1965-) (fizikus) Batta Gyula (1953-) (molekula-szerkezet kutató) Bakó József (1981-) (vegyész) Hartmann, John F. Borbély János (1950-) (vegyész)
Pályázati támogatás:TÁMOP-4.2.2-08/1-2008-0019
TÁMOP
Internet cím:DOI
elektronikus változat
Szerző által megadott URL
Borító:

4.

001-es BibID:BIBFORM089186
Első szerző:Borda Jenő (vegyész)
Cím:Glycolysis of polyurethane foams and elastomers / Jenő Borda, Gabriella Pásztor, Miklós Zsuga
Dátum:2000
ISSN:0141-3910
Megjegyzések:Optimum conditions for the glycolysis of polyurethane flexible foams and elastomers are reported. The crude, two-phase liquid reaction mixture was separated and the upper phase was used as the polyol component of an industrial adhesive mixture. During glycolysis the formation of carbon dioxide was recognized and quantified. On the basis of this new finding a novel reaction mechanism is proposed for the glycolysis of polyurethanes.
Tárgyszavak:Természettudományok Kémiai tudományok idegen nyelvű folyóiratközlemény külföldi lapban
folyóiratcikk
Glycolysis
Polyurethane
Foam
Elastomer
Reaction mechanism
Megjelenés:Polymer Degradation and Stability. - 68 : 3 (2000), p. 419-422. -
További szerzők:Pásztor Gabriella Zsuga Miklós (1944-) (polimer kémikus)
Pályázati támogatás:OTKA T 019508
OTKA
OTKA T 025379
OTKA
OTKA T 025269
OTKA
OTKA T 030519
OTKA
OTKA D 25136
OTKA
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

5.

001-es BibID:BIBFORM089088
Első szerző:Borda Jenő (vegyész)
Cím:Optimum conditions for the synthesis of linear polylactic acid-based urethanes / Jenő Borda, Ildikó Bodnár, Sándor Kéki, László Sipos, Miklós Zsuga
Dátum:2000
ISSN:0887-624X
Megjegyzések:The reactions of polylactic acid (PLA) oligomers and isocyanates (4,4'- diphenylmethane diisocyanate and toluene diisocyanate) are reported. The effects of the reaction conditions, that is, the reaction time, reaction temperature, molar ratios, isocyanates, and catalyst, on the number-average molecular weight (M-n) are demonstrated. The optimum reaction conditions are determined by the synthesis of relatively high M-n PLA-based linear polyurethanes. The structure of the polymer samples was investigated with dynamic light scattering, H-1 NMR, IR, and matrix-assisted laser-desorption ionization time-of-flight mass spectroscopy (MALDI-TOF MS).
Tárgyszavak:Természettudományok Kémiai tudományok idegen nyelvű folyóiratközlemény külföldi lapban
folyóiratcikk
synthesis
linear
polylactic acid
urethanes
Megjelenés:Journal of Polymer Science Part A-Polymer Chemistry. - 38 : 16 (2000), p. 2925-2933. -
További szerzők:Bodnár Ildikó (1975-) (vegyész) Kéki Sándor (1964-) (polimer kémikus) Sipos László (1960-) (vegyész) Zsuga Miklós (1944-) (polimer kémikus)
Pályázati támogatás:OTKA T 019508
OTKA
OTKA T 025379
OTKA
OTKA T 025269
OTKA
OTKA T 030519
OTKA
OTKA M 28369
OTKA
OTKA F 019376
OTKA
FKFP 04441/1997
egyéb
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

6.

001-es BibID:BIBFORM043271
Első szerző:Borda Jenő (vegyész)
Cím:Optimum conditions for the synthesis of linear plylactic acid-based urethanes / Jenő Borda, Ildikó Bodnár, Sándor Kéki, László Sipos, Miklós Zsuga
Dátum:2000
ISSN:0887-624X
Tárgyszavak:Természettudományok Kémiai tudományok idegen nyelvű folyóiratközlemény külföldi lapban
Megjelenés:Journal Of Polymer Science. Part A. Polymer Chemistry. - 38 : 16 (2000), p. 2925-2933. -
További szerzők:Kéki Sándor (1964-) (polimer kémikus) Sipos László Zsuga Miklós (1944-) (polimer kémikus) Bodnár Ildikó (1975-) (vegyész)
Internet cím:Intézményi repozitóriumban (DEA) tárolt változat
Borító:

7.

001-es BibID:BIBFORM018664
Első szerző:Borda Jenő (vegyész)
Cím:Novel polyurethane elastomer continuous carbon fiber composites : Preparation and characterization / Jenő Borda, Sándor Kéki, Istvánné Ráthy, Ildikó Bodnár, Miklós Zsuga
Dátum:2007
ISSN:0021-8995
Megjegyzések:Preparation and characterization of novel polyurethane (PUR)-carbon fiber (CF) composites are reported. The reinforcement of PUR elastomers was achieved using unidirectional continuous CFs with different coatings (uncoated and epoxy and polyester resin coatings) by applying molding for the preparation of PUR-CF composites. Considerable reinforcement of PUR was attained even at relatively low CF content, e.g., maximum stress and Young's modulus of PUR-CF composite at CF content 3% (m/m) were found to be 3-5 and 4-10 times higher than those of the PUR-matrix, respectively. In addition, a linear relationship between the Young's modulus and the CF content was found as well as linear variation of maximum stress with the CF content was also observed. The adhesion of CF to the PUR-matrix was strong in each case as concluded from the strain-stress and the scanning electron microscopy (SEM) investigations. However, the extent of reinforcement of PUR at a given CF content was found to depend greatly on the coatings of CF, and increased in the following order: epoxy resin < polyester resin < uncoated. The effect of the coating of CF on the reinforcement of FUR is also discussed.
Tárgyszavak:Természettudományok Kémiai tudományok idegen nyelvű folyóiratközlemény külföldi lapban
polyurethane
reinforcement
composite coatings
Megjelenés:Journal of applied polymer science. - 103 : 1 (2007), p. 287-292. -
További szerzők:Kéki Sándor (1964-) (polimer kémikus) Ráthy Istvánné (1958-) (gépészmérnök) Bodnár Ildikó (1975-) (vegyész) Zsuga Miklós (1944-) (polimer kémikus)
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

8.

001-es BibID:BIBFORM089568
035-os BibID:(cikkazonosító)123240
Első szerző:Burunkova, Julia (vegyész)
Cím:Influence of gold nanoparticles in polymer nanocomposite on space-temporal-irradiation dependent diffraction grating recording / J. A. Burunkova, D. Alkhalil, D. S. Svjazhina, A. Bonyár, I. Csarnovics, S. Kokenyesi
Dátum:2021
ISSN:0032-3861
Megjegyzések:Following the modern and extremely useful direction of research and development of polymer nanocomposites with combined effects of photopolymerization superimposed by plasmon-induced processes, we investigated acrylate-based nanocomposites with broadband sensitive Irgaqure784 initiator and silicon oxide as well as gold nanoparticles in different regimes of illumination. The details of initiator photodecomposition and polymer chain formation mechanisms at the presence of the gold nanoparticles' (GNPs) plasmon fields and different combinations of irradiation wavelengths or intensities are discussed. These are related to the mechanism and efficiency of holographic volume and surface grating recording based on photopolymerization and mass-transport, diffusion processes of the organic matrix, and nanoparticles. GNP's presence in a monomer nanocomposite influences the recording parameters in a combined way, making preferable the double-wavelength irradiation mode, which may increase the efficiency of the recorded gratings up to two times at decreased exposures. Results may be used for planning fabrication processes of more complex, multifunctional photonic elements.
Tárgyszavak:Természettudományok Fizikai tudományok idegen nyelvű folyóiratközlemény külföldi lapban
folyóiratcikk
Polymer nanocomposite
Photopolymerization processes
Gold nanoparticles
Plasmon fieldsDiffraction gratings
Megjelenés:Polymer. - 214 (2021), p. 1-9. -
További szerzők:Alkhalil, D. Svjazhina, D. S. Bonyár Attila Csarnovics István (1986-) (fizikus) Kökényesi Sándor (1946-) (fizikus)
Pályázati támogatás:GINOP-2.3.2-15-2016-00041
GINOP
BO/348/20
Egyéb
ÚNKP-20-5-DE-107
Egyéb
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

9.

001-es BibID:BIBFORM060752
Első szerző:Burunkova, Julia (vegyész)
Cím:Influence of gold nanoparticles on the photo-polymerization processes and structure in acrylate nanocomposites / J. Burunkova, S. Kokenyesi, I. Csarnovics, A. Bonyár, M. Veres, A. Csik
Dátum:2015
ISSN:0014-3057
Tárgyszavak:Természettudományok Fizikai tudományok idegen nyelvű folyóiratközlemény külföldi lapban
polymer nanocomposite
sio2 and gold nanoparticles
photo-polymerization
surface plasmon resonance imaging
raman spectroscopy
Megjelenés:European Polymer Journal. - 64 (2015), p. 189-195. -
További szerzők:Kökényesi Sándor (1946-) (fizikus) Csarnovics István (1986-) (fizikus) Bonyár Attila Veres M. Csik Attila (1975-) (fizikus)
Pályázati támogatás:TÁMOP-4.2.2.A-11/1/KONV-2012-0036
TÁMOP
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

10.

001-es BibID:BIBFORM047803
Első szerző:Burunkova, Julia (vegyész)
Cím:Fabrication and characterization of gold/acrylic polymer nanocomposites / J. Burunkova, I. Denisiuk, N. Vorzobova, L. Daróczi, Cs. Hegedüs, I. S. Charnovych, S. Kökényesi
Dátum:2013
ISSN:0014-3057
Tárgyszavak:Természettudományok Fizikai tudományok idegen nyelvű folyóiratközlemény külföldi lapban
Gold nanoparticle
Acrylic polymer
Nanocomposite
Megjelenés:European Polymer Journal. - 49 (2013), p. 3072-3079. -
További szerzők:Denisiuk, I. Vorzobova, N. Daróczi Lajos (1965-) (fizikus) Hegedűs Csaba (1953-) (fogszakorvos) Csarnovics István (1986-) (fizikus) Kökényesi Sándor (1946-) (fizikus)
Pályázati támogatás:TÁMOP-4.2.2.A-11/1/KONV-2012-0036
TÁMOP
TÁMOP-4.2.2/B-10/1-2010-0024
TÁMOP
Internet cím:Intézményi repozitóriumban (DEA) tárolt változat
DOI
Borító:

11.

001-es BibID:BIBFORM107273
035-os BibID:(WOS)000631727300001 (Scopus)85104114821
Első szerző:Farkas Vajk
Cím:Synthesis and characterization of a pH-responsive mesalazine-polynorbornene supramolecular assembly / Vajk Farkas, Gábor Turczel, János Deme, Attila Domján, László Trif, Anvar Mirzaei, Dang Vu Hai, Márton Nagyházi, Sándor Kéki, Péter Huszthy, Róbert Tuba
Dátum:2021
ISSN:1759-9954 1759-9962
Megjegyzések:A pH-responsive mesalazine-crown ether and perfluoro tert-butyl functionalized polynorbornene supramolecular assembly (smc-1-4-cp-1-5) has been prepared. A promoted mesalazine (1) anti-inflammatory drug sustained release has been observed at elevated pH (7-9) enabling targeted topical and sustained drug dosing in the inflamed lower gastrointestinal (GI) tract. Thermoanalytical and solid-state NMR investigations of the supramolecular assembly revealed an amorphous, solid solvent structure showing that 1 is evenly distributed in the supramolecular polymer framework. In situ1H NMR investigation revealed a downshift of the respective hydrogens upon mesalazine?supramolecular polymer assembly formation. The equilibrium constant of the complex of crown ether-functionalized norbornene monomer (5) and 1 (log K = 3.4 +/- 0.5, in a DMSO-d6-CD2Cl2 1:1 mixture) was calculated.
Tárgyszavak:Természettudományok Kémiai tudományok idegen nyelvű folyóiratközlemény külföldi lapban
folyóiratcikk
Megjelenés:Polymer Chemistry. - 12 : 14 (2021), p. 2175-2180. -
További szerzők:Turczel Gábor Deme János Domján Attila Trif László Mirzaei, Anvar Vu Hai, Dang Nagyházi Márton Kéki Sándor (1964-) (polimer kémikus) Huszthy Péter Tuba Róbert
Pályázati támogatás:2.3.2-15-2016-00017
GINOP
K128473
OTKA
K115939
OTKA
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

12.

001-es BibID:BIBFORM050117
Első szerző:Hajdu István (vegyész)
Cím:Nanoparticles prepared by self-assembly of Chitosan and poly-γ-glutamic acid / Istvan Hajdu, Magdolna Bodnár, Genovéva Filipcsei, John F. Hartmann, Lajos Daróczi, Miklós Zrínyi, János Borbély
Dátum:2007
ISSN:0303-402X
Megjegyzések:The present paper describes the preparation and characterization of novel biodegradable nanoparticles based on self-assembly of poly-gamma-glutamic acid (γ-PGA) and chitosan (CH). The nanosystems were stable in aqueous media at low pH conditions. Solubility of the systems was determined by turbidity measurements. Surface charge and mobility were measured electrophoretically. The particle size and the size distribution of the polyelectrolyte complexes were identified by dynamic light scattering and transmission electron microscopy (TEM). It was found that the size and size distribution of the nanosystems depends on the concentrations of γ-PGA and CH solutions and their ratio as well as on the pH of the mixture and the order of addition. The diameter of individual particles was in the range of 20-285 nm measured by TEM, and the average hydrodynamic diameters were between 150 and 330 nm. These biodegradable, self-assembling stable nanocomplexes might be useful for several biomedical applications.
Tárgyszavak:Természettudományok Kémiai tudományok idegen nyelvű folyóiratközlemény külföldi lapban
γ-PGA
Chitosan
Polyelectrolyte
Nanoparticles
Complexation
Self-assembly
Electrophoretic mobility
Megjelenés:Colloid and Polymer Science. - 286 : 3 (2007), p. 343-350. -
További szerzők:Bodnár Magdolna Filipcsei Genovéva Hartmann, John F. Daróczi Lajos (1965-) (fizikus) Zrínyi Miklós (kémikus) Borbély János (1950-) (vegyész)
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:
Rekordok letöltése1 2 3 4