Magyar
Toggle navigation
Tudóstér
Magyar
Tudóstér
Keresés
Egyszerű keresés
Összetett keresés
CCL keresés
Egyszerű keresés
Összetett keresés
CCL keresés
Böngészés
Saját polc tartalma
(
0
)
Korábbi keresések
CCL parancs
CCL
Összesen 2 találat.
#/oldal:
12
36
60
120
Rövid
Hosszú
MARC
Részletezés:
Rendezés:
Szerző növekvő
Szerző csökkenő
Cím növekvő
Cím csökkenő
Dátum növekvő
Dátum csökkenő
1.
001-es BibID:
BIBFORM085290
Első szerző:
Naeem, Muhammad Ail (mérnök)
Cím:
Influence of the Manufacturing Parameters on the Compressive Properties of Closed Cell Aluminum Foams / Muhammad Ail Naeem, András Gábora, Tamás Mankovits
Dátum:
2020
ISSN:
0324-6051 1587-379X
Megjegyzések:
The important properties of metallic foams such as good energy absorption, recyclability, noise absorption, etc. have put them at the forefront of technological development over recent years, especially for fields where the weight is a major concern. The production however, is a highly stochastic process which leads to their inhomogeneous nature. In this paper closed-cell aluminum foam specimens have been produced by direct foaming technique and investigated mechanically, following the principles of Taguchi Design of Experiments (DOE). The important compressive properties of the produced specimens such as the structural stiffness, yield strength, plateau stress and energy absorption have been measured through uniaxial compression tests and the effect of the manufacturing parameters (the temperature, the mixing speed and the amount of foaming agent added) on the energy absorption capacity of the foam is analyzed. From experiments, it was observed that the temperature is the most dominant control factor for the energy absorption capability of the foam followed by the foaming content and the mixing speed. ANOVA statistical analysis was also performed to determine the statistical significance of these parameters on the response.
Tárgyszavak:
Műszaki tudományok
Gépészeti tudományok
idegen nyelvű folyóiratközlemény hazai lapban
folyóiratcikk
Megjelenés:
Periodica Polytechnica, Mechanical Engineering. - 64 : 2 (2020), p. 172-178. -
További szerzők:
Gábora András (1970-) (gépészmérnök, kohómérnök)
Mankovits Tamás (1981-) (gépészmérnök)
Internet cím:
Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:
Saját polcon:
2.
001-es BibID:
BIBFORM103804
035-os BibID:
(WOS)000856560300001
Első szerző:
Rashwan, Alkentar (topology optimization) (mechanical engineer)
Cím:
A Study on the Shape and Dimensional Accuracy of Additively Manufactured Titanium Lattice Structures for Orthopedic Purposes / Alkentar Rashwan, Mankovits Tamás
Dátum:
2022
ISSN:
0324-6051 1587-379X
Tárgyszavak:
Műszaki tudományok
Anyagtudományok és technológiák
idegen nyelvű folyóiratközlemény hazai lapban
folyóiratcikk
Megjelenés:
Periodica Polytechnica, Mechanical Engineering. - 66 : 4 (2022), p. 336-343. -
További szerzők:
Mankovits Tamás (1981-) (gépészmérnök)
Internet cím:
Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:
Saját polcon:
Rekordok letöltése
1
Corvina könyvtári katalógus v8.2.27
© 2023
Monguz kft.
Minden jog fenntartva.