CCL

Összesen 2 találat.
#/oldal:
Részletezés:
Rendezés:

1.

001-es BibID:BIBFORM082417
035-os BibID:(Scopus)85077380226
Első szerző:Csáky Imre (épületgépész mérnök)
Cím:Heat storage effect of the operative temperature in PASSOL laboratory / I. Csáky, M. Lakatos
Dátum:2019
ISSN:2062-0810 2063-4269
Tárgyszavak:Műszaki tudományok Gépészeti tudományok idegen nyelvű folyóiratközlemény hazai lapban
folyóiratcikk
Megjelenés:International Review of Applied Sciences and Engineering. - 10 : 3 (2019), p. 259-265. -
További szerzők:Lakatos Máté (mérnök)
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

2.

001-es BibID:BIBFORM036672
Első szerző:Csáky Imre (épületgépész mérnök)
Cím:Simulation of the internal temperature in the Passol Laboratory, University of Debrecen / Csáky, I., Kalmár, F.
Dátum:2012
ISSN:2062-0810
Megjegyzések:Nowadays the facades of newly built buildings have significant glazed surfaces. The solar gains in these buildings can produce discomfort caused by direct solar radiation on the one hand and by the higher indoor air temperature on the other hand. The amplitude of the indoor air temperature variation depends on the glazed area, orientation of the facade and heat storage capacity of the building. This paper presents the results of a simulation, which were made in the Passol Laboratory of University of Debrecen in order to define the internal temperature variation. The simulation proved that the highest amplitudes of the internal temperature are obtained for East orientation of the facade. The upper acceptable limit of the internal air temperature is exceeded for each analyzed orientation: North, South, East, West. Comparing different building structures, according to the obtained results, in case of the heavy structure more cooling hours are obtained, but the energy consumption for cooling is lower.
Tárgyszavak:Műszaki tudományok Gépészeti tudományok idegen nyelvű folyóiratközlemény hazai lapban
simulation
indoor temperature
Passol Laboratory
Fizikai-, Számítás- és Anyagtudomány
Megjelenés:International Review of Applied Sciences and Engineering. - 3 : 1 (2012), p. 63-73. -
További szerzők:Kalmár Ferenc (1974-) (gépészmérnök)
Pályázati támogatás:TÁMOP-4.2.1/B-09/1/KONV-2010-0007
TÁMOP
DEnergia
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:
Rekordok letöltése1