CCL

Összesen 27 találat.
#/oldal:
Részletezés:
Rendezés:

1.

001-es BibID:BIBFORM111184
Első szerző:File Máté (mérnök)
Cím:Egyirányú szálerősítésű kompozit alapanyag multiscale modellezése / Máté File, Gábor Balogh, Dávid Huri, Zoltán Major, Tamás Mankovits
Dátum:2023
ISSN:2668-9685
Megjegyzések:A kompozit alapanyagok végeselemes vizsgálatára jelenleg három módszer ismert. Az egyik a mikrostruktúra teljes modellezése, a másik annak teljes elhanyagolása és a szerkezet egy anyagként történő kezelése, melyet makro modellezésnek nevezünk. A harmadik módszer pedig a meso, vagy multiscale modellezés, mely esetén a mikrostruktúra a végeselem modellen elhanyagolásra kerül, csak egy egységcella formájában hívjuk meg elemi szinten. Ezen munkában a multiscale módszert mutatjuk be egy egyirányú szálerősítéssel rendelkező kompozit alapanyag esetében, az Altair Multiscale Designer szoftver felhasználásával. Ismertetjük a modell létrehozásához szükséges laboratóriumi szakítóvizsgálatokat és a keresztmetszet mikroszkópos analízisét. A modell pontosságának ellenőrzéséhez egy hárompontos hajlítóvizsgálat eredményeit használtuk fel. A vizsgálatot elvégeztük laboratóriumi környezetben, majd ennek megfelelően egy egyszerűsített végeselemes modell is készült az összehasonlításhoz. A számított és mért eredmények összevetésével megállapítottuk az így létrehozott modell pontosságát.
Tárgyszavak:Műszaki tudományok Anyagtudományok és technológiák tanulmány, értekezés
könyvrészlet
egyirányú szálerősítésű kompozit
végeselemes szimuláció
anyagmodell illesztés
Megjelenés:OGÉT 2023 : XXXI. Nemzetközi Gépészeti Konferencia / szerk. Barabás István. - p. 130-135. -
További szerzők:Balogh Gábor (1979-) (gépészmérnök) Huri Dávid (1990-) (gépészmérnök) Major Zoltán Mankovits Tamás (1981-) (gépészmérnök)
Internet cím:Szerző által megadott URL
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

2.

001-es BibID:BIBFORM103384
035-os BibID:(cikkazonosító)012002
Első szerző:File Máté (mérnök)
Cím:Finite element analysis of closed-cell aluminum foam approximated with Weaire-Phelan unit cell structure / M. File, R. Cseke, D. Huri, G. Balogh, T. Mankovits
Dátum:2022
ISSN:1757-8981 1757-899X
Megjegyzések:The finite element modelling of metal foam structures have proven to be a difficult task. Many different modelling approaches exist, both for creating the CAD model and for performing the finite element simulations. This article details the CAD and finite element modelling of an existing aluminum foam. To model the cell structure, the Weaire-Phelan unit cell was used. The different parameters of the unit cell were adjusted to fit the parameters of the existing foam. The physical properties of the finished model were then compared to the original specimen to validate its accuracy. After the comparison, it was determined, that the Weaire-Phelan unit cell can be used to model the physical properties of the structure. The validated and simplified model was then used to perform a finite element analysis under compressive loading. The results were compared to the compression test results of the existing aluminum foam. By comparing the results and calculating the relative errors, it was determined that both the physical and the mechanical properties of metal foam structures can be modelled using this exact method with significant accuracy.
Tárgyszavak:Műszaki tudományok Anyagtudományok és technológiák konferenciacikk
folyóiratcikk
Megjelenés:IOP Conference Series: Materials Science and Engineering. - 1246 (2022), p. 1-7. -
További szerzők:Cseke R. Huri Dávid (1990-) (gépészmérnök) Balogh Gábor (1979-) (gépészmérnök) Mankovits Tamás (1981-) (gépészmérnök)
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

3.

001-es BibID:BIBFORM105917
035-os BibID:(Scopus)85138777178
Első szerző:File Máté
Cím:Optical Investigation of the Strain Distribution with Different Orientations on Aerospace Composite Material / File Máté, Kállai Imre, Huri Dávid, Mankovits Tamás
Dátum:2023
ISSN:2195-4356 2195-4364
Megjegyzések:The orientation in composite materials determines the mechanical properties of the structure. Different orientations have different usages, and by combining multiple layers with changing orientations the best mechanical properties can be achieved for the given load case. This work aims to investigate the effects of the different orientations on the mechanical properties of a glass-fibre reinforced composite material used in aerospace components. Multiple specimens were prepared using the vacuum bagging technology with 0°, 45° and 90°orientations based on the warp direction. The laboratory measurements were done with the INSTRON 68TM-10 material testing machine and the GOM Aramis 12M full-field optical measurement system, which works based on the digital image correlation method. The Aramis system enables the real-time tracking and visualization of the displacement and strain values on the whole surface of the specimen. Under the same conditions tensile tests were performed on each specimen and the results were compared. The mechanical material properties of each orientation were determined.
Tárgyszavak:Műszaki tudományok Anyagtudományok és technológiák konferenciacikk
folyóiratcikk
digital image correlation, material testing, fibre orientation, prepreg composite material
Megjelenés:Lecture Notes in Mechanical Engineering. - 2023 (2023), p. 549-557. -
További szerzők:Kállai Imre (mérnök) Huri Dávid (1990-) (gépészmérnök) Mankovits Tamás (1981-) (gépészmérnök)
Pályázati támogatás:TKP2020-NKA-04
Egyéb
Internet cím:DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

4.

001-es BibID:BIBFORM101613
Első szerző:File Máté
Cím:Lineárisan rugalmas anyagmodell pontosságának vizsgálata poliamid modellezésekor optikai mérőrendszer segítségével = Investigating the accuracy of the linear elastic material models when modelling PA6 using an optical measurement system / File Máté, Huri Dávid, Mankovits Tamás
Dátum:2022
ISSN:2668-9685
Tárgyszavak:Műszaki tudományok Gépészeti tudományok előadáskivonat
könyvrészlet
Megjelenés:XXX. Nemzetközi Gépészeti Konferencia - OGÉT 2022. - p. 128-131. -
További szerzők:Huri Dávid (1990-) (gépészmérnök) Mankovits Tamás (1981-) (gépészmérnök)
Pályázati támogatás:TKP2020-NKA-04
Egyéb
Internet cím:Szerző által megadott URL
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

5.

001-es BibID:BIBFORM099887
035-os BibID:(cikkazonosító)1057 (Scopus)85123110884 (WOS)000754950800001
Első szerző:File Máté
Cím:Optical Investigation of the Limits of Modeling the Nonlinear Elastic Behavior of PA6 Using Linear Elastic Material Models / Máté File, Tamás Mankovits, Dávid Huri
Dátum:2022
ISSN:2076-3417
Megjegyzések:Featured Application In the design of engineering polymeric products, the detailed finite element investigation is indispensable. In most cases, polymeric products are investigated with multilinear material models over the entire stress-strain range. The definition of these material models requires material parameters, which must be obtained through time and cost demanding laboratory measurements. For some applications, such as quasi-static loading, it would be sufficient to use a linear elastic material model, the material constants of which can be obtained quickly. This article can help designers to apply the right material model as the linear elastic material model can be used until the 0.96% strain value in the case of the PA6 material with sufficient accuracy. One of the most critical issues during polymer finite element simulations is the selection of the proper material models. The widely used and accepted multilinear material models require load case-specific material tests, which are time and cost demanding. Data for these characteristics must be acquired by standardized measurements. On the other hand, the parameters required to create a linear elastic material model in most cases are easy to obtain, and the establishment of the model is a shorter process. This research is aimed to provide information to engineers about the possibility of modeling the nonlinear elastic materials by using linear elastic material models and about the limits of such models. To create the most accurate material models, laboratory measurements were performed on polyamide (PA6) material, which is a widely used raw material in the industry. Test specimens were manufactured to obtain material constants according to the ISO 527-2 standard, and for validating the effectiveness of the applied material models, three different tensile specimens were created, which were tested under quasi-static loading in the elastic region. A comprehensive finite element investigation was performed, and the numerical results were then compared to laboratory measurements using the GOM Aramis digital image correlation (DIC) system. By comparing the optically measured strain data to the numerical results, it was determined that the nonlinear elastic materials can be modeled using linear elastic models in a well identifiable strain range with sufficient accuracy.
Tárgyszavak:Műszaki tudományok Anyagtudományok és technológiák idegen nyelvű folyóiratközlemény külföldi lapban
folyóiratcikk
polyamide 6
finite element analysis
digital image correlation
material model fitting
Megjelenés:Applied Sciences-Basel. - 12 : 3 (2022), p. 1-16. -
További szerzők:Mankovits Tamás (1981-) (gépészmérnök) Huri Dávid (1990-) (gépészmérnök)
Internet cím:DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

6.

001-es BibID:BIBFORM111181
Első szerző:Huri Dávid (gépészmérnök)
Cím:SLS technológiával nyomtatott hőre lágyuló poliuretán feszültség-nyúlás karakterisztikájának meghatározása / Dávid Huri, Máté File, Dániel Nemes, Zoltán Major, Tamás Mankovits
Dátum:2023
ISSN:2668-9685
Megjegyzések:A hőre lágyuló poliuretán (TPU) az elasztomerek csoportjába tartozik, azaz egy elasztikus és viszkózus tulajdonságokkal rendelkező polimer. Jó környezeti és kopásállóságának, továbbá nagymértékűrugalmasságának köszönhetően széles körben alkalmazott sporteszközöknél, járműipari alkatrészeknél, vagy éppen automatizálásban alkalmazott egyedi megfogókhoz. A TPU feldolgozható 3D nyomtatási technológiákkal, melyek közül a szelektív lézerszinterező (SLS) nyomtatók adják a legnagyobb pontosságot és formai szabadságot. Az így létrehozható termék tervezését statikai végeselemes analízissel és jól beállított elmozdulás szabadságfokú anyagmodellel lehet elvégezni. A gumi nemlineárisan nagymértékű rugalmas izotrop viselkedését hiperelasztikus anyagmodellel lehet leírni. Az energia alapú modellek paramétereinek illesztéséhez szükséges az egy- és kéttengelyű, valamint tiszta nyíró igénybevételre adott anyagi viselkedések meghatározása. Jelen cikk a Sinterit Flexa Soft alapanyag egytengelyű terhelés alatti viselkedését vizsgálja.
Tárgyszavak:Műszaki tudományok Anyagtudományok és technológiák tanulmány, értekezés
könyvrészlet
SLS
TPU
3D nyomtatás
Sinterit Flexa Soft
anyagi viselkedés
Megjelenés:OGÉT 2023 : XXXI. Nemzetközi Gépészeti Konferencia / szerk. Barabás István. - p. 241-246. -
További szerzők:File Máté (2000-) (mérnök) Nemes Dániel (1997-) (gépészmérnök) Major Zoltán Mankovits Tamás (1981-) (gépészmérnök)
Internet cím:Szerző által megadott URL
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

7.

001-es BibID:BIBFORM102153
035-os BibID:(Scopus)85131553351 (cikkazonosító)5451 (WOS)000809194500001
Első szerző:Huri Dávid (gépészmérnök)
Cím:Surrogate Model-Based Parameter Tuning of Simulated Annealing Algorithm for the Shape Optimization of Automotive Rubber Bumpers / Dávid Huri, Tamás Mankovits
Dátum:2022
ISSN:2076-3417
Megjegyzések:Featured Application The developed surrogate model-based parameter tuning method of the simulated annealing algorithm is suitable for solving not only numerical simulation optimization problems but also other computationally intensive model-driven optimizations. A design engineer has to deal with increasingly complex design tasks on a daily basis, for which the available design time is shrinking. Market competitiveness can be improved by using optimization if the design process can be automated. If there is limited information about the behavior of the objective function, global search methods such as simulated annealing (SA) should be used. This algorithm requires the selection of a number of parameters based on the task. A procedure for reducing the time spent on tuning the SA algorithm for computationally expensive, simulation-driven optimization tasks was developed. The applicability of the method was demonstrated by solving a shape optimization problem of a rubber bumper built into air spring structures of lorries. Due to the time-consuming objective function call, a support vector regression (SVR) surrogate model was used to test the performance of the optimization algorithm. To perform the SVR training, samples were taken using the maximin Latin hypercube design. The SA algorithm with an adaptive search space and different cooling schedules was implemented. Subsequently, the SA parameters were fine-tuned using the trained SVR surrogate model. An optimal design was found using the adapted SA algorithm with negligible error from a technical aspect.
Tárgyszavak:Műszaki tudományok Anyagtudományok és technológiák idegen nyelvű folyóiratközlemény külföldi lapban
folyóiratcikk
finite element analysis
hyperelastic material model
support vector regression
engineering optimization
simulated annealing
parameter tuning
Megjelenés:Applied Sciences-Basel. - 12 : 11 (2022), p. 1-22. -
További szerzők:Mankovits Tamás (1981-) (gépészmérnök)
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

8.

001-es BibID:BIBFORM096455
035-os BibID:(Scopus)85122623841
Első szerző:Huri Dávid (gépészmérnök)
Cím:Automotive Rubber Product Design Using Response Surface Method / Dávid Huri, Tamás Mankovits
Dátum:2022
ISSN:0303-7800
Tárgyszavak:Műszaki tudományok Anyagtudományok és technológiák idegen nyelvű folyóiratközlemény hazai lapban
folyóiratcikk
Megjelenés:Periodica Polytechnica Transportation Engineering. - 50 : 1 (2022), p. 28-38. -
További szerzők:Mankovits Tamás (1981-) (gépészmérnök)
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

9.

001-es BibID:BIBFORM085890
035-os BibID:(cikkazonosító)3584 (WOS)000541440000245 (Scopus)85085608229
Első szerző:Huri Dávid (gépészmérnök)
Cím:Parameter Selection of Local Search Algorithm for Design Optimization of Automotive Rubber Bumper / Dávid Huri, Tamás Mankovits
Dátum:2020
ISSN:2076-3417
Tárgyszavak:Műszaki tudományok Anyagtudományok és technológiák idegen nyelvű folyóiratközlemény külföldi lapban
folyóiratcikk
Megjelenés:Applied Sciences-Basel. - 10 : 10 (2020), p. 1-16. -
További szerzők:Mankovits Tamás (1981-) (gépészmérnök)
Internet cím:DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

10.

001-es BibID:BIBFORM081824
035-os BibID:(cikkazonosító)012022 (Scopus)85075354008
Első szerző:Huri Dávid (gépészmérnök)
Cím:Automotive rubber part design using machine learning / D. Huri, T. Mankovits
Dátum:2019
ISSN:1757-8981 1757-899X
Tárgyszavak:Műszaki tudományok Gépészeti tudományok konferenciacikk
folyóiratcikk
Megjelenés:IOP Conference Series: Materials Science and Engineering. - 659 (2019), p. 1-6. -
További szerzők:Mankovits Tamás (1981-) (gépészmérnök)
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

11.

001-es BibID:BIBFORM076751
Első szerző:Huri Dávid (gépészmérnök)
Cím:Comparsion of the hyperelastic material models in the finite element investigations of rubber parts / Dávid Huri, Tamás Mankovits
Dátum:2018
ISBN:9789634900511
Tárgyszavak:Műszaki tudományok Gépészeti tudományok előadáskivonat
könyvrészlet
Megjelenés:Proceedings of the 6th International Scientific Conference on Advances in Mechanical Engineering (ISCAME 2018) : Book of extended abstracts / ed. Tamás Mankovits. - p. 75-76. -
További szerzők:Mankovits Tamás (1981-) (gépészmérnök)
Internet cím:Szerző által megadott URL
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

12.

001-es BibID:BIBFORM074868
035-os BibID:(cikkazonosító)012018 (Scopus)85051863925
Első szerző:Huri Dávid (gépészmérnök)
Cím:Comparison of the material models in rubber finite element analysis / Dávid Huri, Tamás Mankovits
Dátum:2018
ISSN:1757-8981 1757-899X
Tárgyszavak:Műszaki tudományok Anyagtudományok és technológiák konferenciacikk
folyóiratcikk
Megjelenés:IOP Conference Series: Materials Science and Engineering. - 393 (2018), p. 1-7. -
További szerzők:Mankovits Tamás (1981-) (gépészmérnök)
Internet cím:DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:
Rekordok letöltése1 2 3