CCL

Összesen 5 találat.
#/oldal:
Részletezés:
Rendezés:

1.

001-es BibID:BIBFORM074878
Első szerző:Khoury, Wadee (mérnök)
Cím:Robust control system design for a brushed direct current motor using LabVIEW simulation loop / Wadee Khoury, Péter Tamás Szemes
Dátum:2018
ISSN:2261-236X
Megjegyzések:This paper presents the design of PID control system to control the position of a brushed DC motor. The system was modeled and simulated using LabVIEW 2014, in the computer environment, DC motor was created, and simulations were examined on this model. The control system was developed applying sensitivity analysis for the open loop system of the speed loop. In the simulation, the motor voltage, position, and speed were measured from the motor model. The speed and position data collected from the simulation was used as the closed-loop feedback control system. A proportional integral controller (PI) was used to control the speed and a proportional controller for the position control.
Tárgyszavak:Műszaki tudományok Informatikai tudományok konferenciacikk
Brushed DC motor control
LabVIEW
Megjelenés:Matec Web of Conferences. - 184 : Paper 02020 (2018), p. [4]. -
További szerzők:Szemes Péter Tamás (1976-) (gépészmérnök, villamosmérnök)
Pályázati támogatás:EFOP-3.6.1-16-2016-00022
EFOP
Internet cím:DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

2.

001-es BibID:BIBFORM074122
035-os BibID:(cikkazonosító)02019
Első szerző:Khoury, Wadee (mérnök)
Cím:Three Phase Induction Motor Modeling and Speed Control Using Vector Control in LabVIEW / Wadee Khoury, Aram Nasser, Peter Tamas Szemes
Dátum:2018
ISSN:2261-236X
Megjegyzések:In this paper, a speed control system for a three-phase induction motor was modeled and designed within LabVIEW software environment. After getting the dynamical model of the motor, a voltage controller was developed to stabilize the system and avoid a wind-up situation. Then, a current controller was designed, using PID and Field Weakening techniques, to generate the reference current values. The field-weakening algorithm is used to achieve stability at higher speeds than the nominal one. An estimator is used to calculate the flux angle and the electro-mechanical speed needed for the system. As a result, the system achieved the desired speed with a good transient response, and the field-weakening block worked perfectly as expected. In addition, the system proved robust when the torque load is applied, even at high speeds.
Tárgyszavak:Műszaki tudományok Villamosmérnöki tudományok konferenciacikk
Induction motor
LabVIEW
Megjelenés:MATEC Web of Conferences. - 184 (2018), p. 1-6. -
További szerzők:Nasser, Aram (mérnök) Szemes Péter Tamás (1976-) (gépészmérnök, villamosmérnök)
Pályázati támogatás:EFOP-3.6.1-16-2016-00022
EFOP
Internet cím:Intézményi repozitóriumban (DEA) tárolt változat
DOI
Borító:

3.

001-es BibID:BIBFORM074099
Első szerző:Khoury, Wadee (mérnök)
Cím:Robust Control System Design for a Brushed DC Motor Using LabVIEW Simulation Loop / Wadee Khoury, Péter Tamás Szemes
Dátum:2018
Megjegyzések:Konferencia helye, ideje: Oradea, Románia, 2018.05.31-2018.06.01.
ISBN:978-606-10-1537-5
Tárgyszavak:Műszaki tudományok Informatikai tudományok tanulmány, értekezés
Megjelenés:"Imt Oradea" - 2018 : Proceedings of the Annual Seesion of Scientific Papers. - p. 323-326. -
További szerzők:Szemes Péter Tamás (1976-) (gépészmérnök, villamosmérnök)
Internet cím:Intézményi repozitóriumban (DEA) tárolt változat
Borító:

4.

001-es BibID:BIBFORM074098
Első szerző:Khoury, Wadee (mérnök)
Cím:Three Pase Induction Motor Modelling and Control Using Vector Control in Labview / Wadee Khoury, Aram Nasser, Péter Tamás Szemes
Dátum:2018
Megjegyzések:Konferencia helye, ideje: Oradea, Románia, 2018.05.31-2018.06.01.
ISBN:978-606-10-1537-5
Tárgyszavak:Műszaki tudományok Informatikai tudományok tanulmány, értekezés
Megjelenés:"Imt Oradea" - 2018 : Proceedings of the Annual Seesion of Scientific Papers. - p. 317-322. -
További szerzők:Nasser, Aram (mérnök) Szemes Péter Tamás (1976-) (gépészmérnök, villamosmérnök)
Internet cím:Intézményi repozitóriumban (DEA) tárolt változat
Borító:

5.

001-es BibID:BIBFORM074075
Első szerző:Khoury, Wadee (mérnök)
Cím:Robust Control System Design for a Brushed DC Motor Using LabVIEW Simulation Loop / Wadee Khoury, Péter Tamás Szemes
Dátum:2018
ISSN:1583-0691
Megjegyzések:This paper presents a robust control system design for a PMDC motor using LabVIEW software. At first, the mathematical equations of the motor were modelled and simulated. Then, a proportional integral controller (PI) was used as a speed controller. To guarantee the robustness of the system against the disturbances, the PI parameters were tuned by applying a sensitivity analysis. Finally, a proportional gain was used as a position controller to guide the system towards the desired angle. The simulation was achieved by using LabVIEW Simulation Loop, and the sensitivity analysis was carried using LabVIEW MathScript tool.
Tárgyszavak:Műszaki tudományok Informatikai tudományok idegen nyelvű folyóiratközlemény külföldi lapban
Megjelenés:Analele Universitatii Din Oradea. Fasciola Management Si Inginerie Tehnologica = Annals of University of Oradea. Fascicle of Management and Technological Engineering. - 17 (27) : 2 (2018), p. 157-160. -
További szerzők:Szemes Péter Tamás (1976-) (gépészmérnök, villamosmérnök)
Pályázati támogatás:EFOP-3.6.1-16-2016-00022
EFOP
Internet cím:Intézményi repozitóriumban (DEA) tárolt változat
Borító:
Rekordok letöltése1