CCL

Összesen 5 találat.
#/oldal:
Részletezés:
Rendezés:

1.

001-es BibID:BIBFORM105309
Első szerző:Bodzás Sándor (okleveles gépészmérnök)
Cím:Design and finite element analysis of planetary gear drives by the number of planet gears / Sándor Bodzás, Zsolt Tiba, Józef Menyhárt, Zsolt Békési, József Kertész
Dátum:2022
Megjegyzések: the aim of this study is the tooth contact analysis (TCA) of planetary gear drives in the function of the number of planet gears. We designed three types of planetary gear drives where the difference between the appliances are the number of planet gears. All of the other input geometric parameters were chosen for the same. The geometric design was done by the GearTeq software. After that the computer aided modelling (CAD) and the assembly could be done by SolidWorks software. Finite element analysis (FEM) was done on the tooth contact zone of the planet gear, the sun gear and the ring gear using of Ansys software. The normal stress and the normal deformation parameters were analyzed on the connection surfaces of the pinion (sun gear and planet gear) and the gear (planet gear and ring gear).
ISBN:9786156032577
Tárgyszavak:Műszaki tudományok Gépészeti tudományok előadáskivonat
könyvrészlet
planet gear
planetary gear drive
stress
deformation
CAD
FEM
Megjelenés:Műszaki tudomány az Észak-kelet-Magyarországi régióban 2022 / szerk. Páy Gábor. - p. 126-131. -
További szerzők:Tiba Zsolt (1965-) (gépészmérnök) Menyhárt József (1988-) (gépészmérnök, létesítménymérnök, lean szakmérnök) Békési Zsolt (1988-) (gépészmérnök) Kertész József (1990-) (járműmérnök)
Pályázati támogatás:2020-4.1.1-TKP2020
egyéb
Internet cím:Szerző által megadott URL
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

2.

001-es BibID:BIBFORM102374
Első szerző:Bodzás Sándor (okleveles gépészmérnök)
Cím:Fogaskerék bolygóművek tervezése és végeselem vizsgálata a bolygókerekek számának függvényében / Bodzás Sándor, Tiba Zsolt, Menyhárt József, Békési Zsolt, Kertész József
Dátum:2022
ISBN:978-615-6032-50-8
Tárgyszavak:Műszaki tudományok Gépészeti tudományok előadáskivonat
könyvrészlet
Megjelenés:Műszaki tudomány az észak-kelet magyarországi régióban 2022 : konferencia előadások kivonatai / szerk. Kocsis Imre, Dezső Gergely. - p. 32. -
További szerzők:Tiba Zsolt (1965-) (gépészmérnök) Menyhárt József (1988-) (gépészmérnök, létesítménymérnök, lean szakmérnök) Békési Zsolt (1988-) (gépészmérnök) Kertész József (1990-) (járműmérnök)
Internet cím:Intézményi repozitóriumban (DEA) tárolt változat
Borító:

3.

001-es BibID:BIBFORM072643
Első szerző:Tiba Zsolt (gépészmérnök)
Cím:Eliminating the Positioning Error of Gamma Knife ; Recommendations for the Mechanical Overhaul / Zsolt Tiba, Dániel Fekete-Szűcs, József Menyhárt
Dátum:2017
Megjegyzések: Konferencia helye, ideje: Debrecen, Magyarország, 2017.10.12-2017.10.13.
The gamma knife is a medical device engineered in the last third of XX century. One of thesedevices has been partial regenerated. The regeneration involved the change of the run-downradiation source as well as the rebuild of motors and control equipment. After the partialregeneration the device worked not properly. The failure was detected by the computer control unit.It was considered by the control unit serious problem and operation of the device was stopped. Theerror was provisionally ceased however during the inspection it was realized that there weresignificant changes in operation conditions of the machinery. In this paper we introduce the type ofthe error and the reason for it, the provisionally repair, as well as we give suggestion for rebuildinginvolving reconstruction with which the problem can be definitively eliminated. The paper does notstudy the device from medical point of view. The device is considered as a machinery and weintroduce the operation errors and the cause of them as well as we give recommendation for therepair.
ISBN:978-963-473-304-1
Tárgyszavak:Műszaki tudományok Gépészeti tudományok tanulmány, értekezés
Gamma knife
positioning error
cobalt-60 source
source body
collimator body
Megjelenés:Proceedings of the 5th International Scientific Conference on Advances in Mechanical Engineering (ISCAME 2017) / eds. Sándor Bodzás, Tamás Mankovits. - p. 560-568. -
További szerzők:Fekete-Szücs Dániel (1968-) (gépészmérnök) Menyhárt József (1988-) (gépészmérnök, létesítménymérnök, lean szakmérnök)
Internet cím:Szerző által megadott URL
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

4.

001-es BibID:BIBFORM082293
Első szerző:Zhao, G. (mérnök)
Cím:Optimization and Analysis of Structure about Lifting Device of Logistics Sorting / G. Zhao, Zs. Tiba, J. Menyhárt
Dátum:2019
ISSN:2498-700X
Tárgyszavak:Műszaki tudományok Gépészeti tudományok idegen nyelvű folyóiratközlemény hazai lapban
folyóiratcikk
Megjelenés:International Journal of Engineering and Management Sciences. - 4 : 4 (2019), p. 425-431. -
További szerzők:Tiba Zsolt (1965-) (gépészmérnök) Menyhárt József (1988-) (gépészmérnök, létesítménymérnök, lean szakmérnök)
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

5.

001-es BibID:BIBFORM082294
Első szerző:Zhao, G. (mérnök)
Cím:The Effect of annealing temperature on corrosion resistance and microstructure of Zr-Sn-Nb-Fe alloy / G. Zhao, Zs. Tiba, J. Menyhárt
Dátum:2019
ISSN:2498-700X
Tárgyszavak:Műszaki tudományok Gépészeti tudományok idegen nyelvű folyóiratközlemény hazai lapban
folyóiratcikk
Megjelenés:International Journal of Engineering and Management Sciences. - 4 : 4 (2019), p. 420-424. -
További szerzők:Tiba Zsolt (1965-) (gépészmérnök) Menyhárt József (1988-) (gépészmérnök, létesítménymérnök, lean szakmérnök)
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:
Rekordok letöltése1