CCL

Összesen 13 találat.
#/oldal:
Részletezés:
Rendezés:

1.

001-es BibID:BIBFORM081235
035-os BibID:(cikkazonosító)3873 (WoS)000498391700069 (Scopus)85074976334
Első szerző:Afghan, Syeda Adila (mérnök)
Cím:Modelling and Analysis of Energy Harvesting in Internet of Things (IoT) : Characterization of a Thermal Energy Harvesting Circuit for IoT based Applications with LTC3108 / Syeda Adila Afghan, Géza Husi
Dátum:2019
ISSN:1996-1073
Megjegyzések:This paper presents a simulation-based study for characterizing and analyzing the performance of a commercially available thermoelectric cooler (TEC) as a generator for harvesting heat energy along with a commercial-off-the-shelf (COTS) power management integrated circuit (PMIC); LTC3108. In this model, the transformation of heat was considered in terms of an electrical circuit simulation perspective, where temperature experienced by TEC on both cold and hot sides was incorporated with voltage supply as Vth and Vtc in the circuit. When it comes to modeling a system in a simulation program with an integrated circuit emphasis (SPICE) like environment, the selection of thermoelectric generator (TEG) and extraction methods are not straightforward as well as the lack of information from manufacturer's datasheets can limit the grip over the analysis parameters of the module. Therefore, it is mandatory to create a prototype before implementing it over a physical system for energy harvesting circuit (EHC) optimization. The major goal was to establish the basis for devising the thermal energy scavenging based Internet of Things (IoT) system with two configurations of voltage settings for the same TEG model. This study measured the data in terms of current, voltage, series of resistive loads and various temperature gradients for generating the required power. These generated power levels from EHC prototype were able to sustain the available IoT component's power requirement, hence it could be considered for the implementation of IoT based applications.
Tárgyszavak:Műszaki tudományok Informatikai tudományok idegen nyelvű folyóiratközlemény külföldi lapban
folyóiratcikk
Megjelenés:Energies. - 12 : 20 (2019), p. 1-13. -
További szerzők:Husi Géza (1962-) (gépészmérnök, mechatronikai mérnök, számítógépes tervezőmérnök)
Internet cím:DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

2.

001-es BibID:BIBFORM074023
Első szerző:Afghan, Syeda Adila (mérnök)
Cím:Simulating the Electrical Characteristics of Solar Panels based on Practical Single-Diode Equivalent Circuit Model : Analyzing the Influence of Environmental Parameters on Output Power / Syeda Adila Afghan, Husam Almusawi, Husi Géza
Dátum:2019
Megjegyzések:This research paper presents the simulation based study of two commercialsolar modules to predict the real-time characteristics, modelled by thesingle mechanism five parameters (1M5P) solar equivalent circuit. The mathematicalequations have been used to calculate the non-linear behaviour of thesystem which is mandatory to characterise the I - V and P - V curves of thepanels. The Photovoltaic systems of 300 W; Mono-crystalline and Poly-crystallinesolar panels have been used to evaluate the model. Comprehensive simulationshave been carried out to effectively asses the solar irradiation and temperaturedependence in the performance of output power of the panels.
ISBN:978-3-319-91334-6
Tárgyszavak:Műszaki tudományok Informatikai tudományok előadáskivonat
könyvrészlet
Megjelenés:Innovation, Engineering and Entrepreneurship / eds. José Machado, Filomena Soares, Germano Veiga. - p. 67-74. -
További szerzők:Almusawi, Husam Abdulkareem (mérnök) Husi Géza (1962-) (gépészmérnök, mechatronikai mérnök, számítógépes tervezőmérnök)
Internet cím:DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

3.

001-es BibID:BIBFORM073528
Első szerző:Afghan, Syeda Adila (mérnök)
Cím:Towards the self-powered Internet of Things (IoT) by energy harvesting : Trends and technologies for green IoT / Afghan Syeda Adila, Almusawi Husam, Géza Husi
Dátum:2018
Megjegyzések:IoT is hypothetically to be deployed everywhere and to be accessed anywhere at any time, such a remarkable contribution towards the reliable solutions for ease of customers on the go. This emerging technology has a major obstacle which is creating hurdle for technological advancement for upcoming years. The limited life span of rechargeable batteries for IoT devices and applications made this ubiquitous technology on the verge of inadequate battery power. The only viable solution for prolonging battery life of huge interconnected network of devices is to harvest ambient energy sources from surroundings. This paper emphases on brief overview regarding harvesting technologies to power up the IoT devices, the related approach regarding design considerations of an IoT module and the power management as the key component inside any energy harvesting based IoT system.
ISBN:978-1-5386-4437-9
Tárgyszavak:Műszaki tudományok Villamosmérnöki tudományok előadáskivonat
könyvrészlet
Megjelenés:2018 2nd International Symposium on Small-scale Intelligent Manufacturing Systems (SIMS). - p. 1-5. -
További szerzők:Almusawi, Husam Abdulkareem (mérnök) Husi Géza (1962-) (gépészmérnök, mechatronikai mérnök, számítógépes tervezőmérnök)
Internet cím:DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

4.

001-es BibID:BIBFORM071056
Első szerző:Afghan, Syeda Adila (mérnök)
Cím:Modelling and Simulating Photovoltaic Energy Harvesting Circuit : an Analysis based on Trial and Error approximation for Optimal Output Power of a Harvester / Afghan Syeda Adila, Géza Husi
Dátum:2017
ISBN:978-1-5386-0774-9
Tárgyszavak:Műszaki tudományok Informatikai tudományok előadáskivonat
könyvrészlet
Megjelenés:2017 International Conference on Engineering, Technology and Innovation (ICE/ITMC) : Conference Proceedings. - p. 504-508. -
További szerzők:Husi Géza (1962-) (gépészmérnök, mechatronikai mérnök, számítógépes tervezőmérnök)
Internet cím:Intézményi repozitóriumban (DEA) tárolt változat
DOI
Borító:

5.

001-es BibID:BIBFORM070931
035-os BibID:(cikkazonosító)03002
Első szerző:Afghan, Syeda Adila (mérnök)
Cím:Simulating the electrical characteristics of a photovoltaic cell based on a single-diode equivalent circuit model / Syeda Adila Afghan, Husam Almusawi, Husi Geza
Dátum:2017
ISSN:2261-236X
Megjegyzések:This research work presents the simulation based study of a commercial solar cell for analyzing the real-time behavior of a PV module. The mathematical modelling is based on Equivalent circuit of the solar cell and demonstrating the practical approach for using the single diode five parameters (IM5P) mechanism. This research involves purely mathematical formulation to extract the unknown parameters of PV cell by applying the Lambert W function. The I - V and P - V characteristics are emulated under different temperature and radiation levels by using the Linear Technology's LTSpice simulator.
Tárgyszavak:Műszaki tudományok Gépészeti tudományok konferenciacikk
folyóiratcikk
PV module
IM5P
Megjelenés:MATEC Web of Conferences. - 126 (2017), p. 1-6. -
További szerzők:Almusawi, Husam Abdulkareem (mérnök) Husi Géza (1962-) (gépészmérnök, mechatronikai mérnök, számítógépes tervezőmérnök)
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

6.

001-es BibID:BIBFORM069594
Első szerző:Afghan, Syeda Adila (mérnök)
Cím:Estimation of minimum output power threshold for energy harvesting module : an inspection of battery and charging parameters of cell phones / Syeda Adila Afghan, Husam Almusawi, Sana Hoor Jokhio, Géza Husi
Dátum:2016
ISBN:978-963-449-016-6
Tárgyszavak:Műszaki tudományok Villamosmérnöki tudományok előadáskivonat
könyvrészlet
Megjelenés:Proceedings of 4th International Mechatronical Student Micro-Conference / eds. Adrienn Dineva, István Nagy. - p. 56-71. -
További szerzők:Almusawi, Husam Abdulkareem (mérnök) Jokhio, Sana Hoor Husi Géza (1962-) (gépészmérnök, mechatronikai mérnök, számítógépes tervezőmérnök)
Internet cím:Szerző által megadott URL
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

7.

001-es BibID:BIBFORM069385
Első szerző:Afghan, Syeda Adila (mérnök)
Cím:Simulating the electrical characteristics of a photovoltaic cell based on a single-diode equivalent circuit model / Syeda Adila Afghan, Husam Almusawi, Husi Geza
Dátum:2017
ISSN:1583-0691
Megjegyzések:This research work presents the simulation based study of a commercial solar cell for analyzing the real-time behavior of a PV module. The mathematical modelling is based on Equivalent circuit of the solar cell and demonstrating the practical approach for using the single diode five parameters (IM5P) mechanism. This research involves purely mathematical formulation to extract the unknown parameters of PV cell by applying the Lambert W function. The I - V and P - V characteristics are emulated under different temperature and radiation levels by using the Linear Technology's LTSpice simulator.
Afghan, Syeda Adila (1988-) (mérnök): Simulating the electrical characteristics of a photovoltaic cell based on a single-diode equivalent circuit model
Tárgyszavak:Műszaki tudományok Villamosmérnöki tudományok idegen nyelvű folyóiratközlemény külföldi lapban
folyóiratcikk
Energy Harvesting
I - V & P - V Curve
Solar Equivalent Circuit
Lambert W function
Megjelenés:Analele Universităţii din Oradea. Fascicula Inginerie Managerială şi Tehnologică = Annals of the Oradea University. Fascicle of Management and Technological Engineering. - 26 : 1 (2017), p. 91-96. -
További szerzők:Almusawi, Husam Abdulkareem (mérnök) Husi Géza (1962-) (gépészmérnök, mechatronikai mérnök, számítógépes tervezőmérnök)
Internet cím:Intézményi repozitóriumban (DEA) tárolt változat
   Lásd még:
Egyéb kapcsolat (1)
Borító:

8.

001-es BibID:BIBFORM069165
Első szerző:Afghan, Syeda Adila (mérnök)
Cím:Simulating the electrical characteristics of a photovoltaic cell based on a single-diode equivalent circuit model / Syeda Adila Afghan, Husam Almusawi, Géza Husi
Dátum:2017
Megjelenés:Utánközlés / Kiadói másodközlés
Megjegyzések:Afghan, Syeda Adila (1988-) (mérnök): Simulating the electrical characteristics of a photovoltaic cell based on a single-diode equivalent circuit model
ISBN:978-606-10-1537-5
Tárgyszavak:Műszaki tudományok Gépészeti tudományok előadáskivonat
könyvrészlet
Megjelenés:Proceedings of the Annual Session of Scientific Papers "Imt Oradea - 2017", 25th-27th May, Oradea, Romania / eds. Calin Baban, Florin Sandu Blaga, Gavril Grebenisan, Alexandru-Viorel Pele, Mircea Teodor Pop, Alexandru Rus, Radu Catalin Tarca. - p. 181-186. -
További szerzők:Almusawi, Husam Abdulkareem (mérnök) Husi Géza (1962-) (gépészmérnök, mechatronikai mérnök, számítógépes tervezőmérnök)
Internet cím:Intézményi repozitóriumban (DEA) tárolt változat
   Lásd még:
Utánközlés (1)
Borító:

9.

001-es BibID:BIBFORM068047
Első szerző:Afghan, Syeda Adila (mérnök)
Cím:Minimális kimeneti teljesítmény meghatározása energy harvesting prototípushoz : egy esettanulmány mobiltelefon specifikációkra = Approximating the minimum output power for energy harvesting prototype : a case study of cell phone specifications / Afghan Syeda Adila, Almusawi Husam, Géza Husi
Dátum:2017
ISSN:2393-1280
ISBN:978-963-449-018-0
Tárgyszavak:Műszaki tudományok Villamosmérnöki tudományok előadáskivonat
könyvrészlet
Megjelenés:A XXII. Fiatal Műszakiak Tudományos Ülésszak előadásai = Proceedings of the XXII-th International Scientific Conference of Young Engineers / szerk. Bitay Enikő. - p. 55-58. -
További szerzők:Almusawi, Husam Abdulkareem (mérnök) Husi Géza (1962-) (gépészmérnök, mechatronikai mérnök, számítógépes tervezőmérnök)
Internet cím:Szerző által megadott URL
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

10.

001-es BibID:BIBFORM074024
Első szerző:Almusawi, Husam Abdulkareem (mérnök)
Cím:Designing the Mechanical Parts of a Low-Cost Hand Rehabilitation CPM Device for Stroke Patients / Husam Almusawi, Syeda Adila Afghan, Géza Husi
Dátum:2019
Megjegyzések:Stroke survivors are suffering of losing their hands proper functions.The aim of this paper is to introduce hand rehabilitation end-effector-based mechanicalsystem that can be used by the post stroke patients for improving theirhand recovery process after the hand injury caused by stroke. This paper is focusedon designing the mechanical assemblies of the CPM device. The mechanicaldesign has been divided to two assemblies, one discussing the fingers rehabilitationCPM device after the hand injury or stroke, secondly, it presents themechanism movement and the DOF of the hand rehabilitation machine. Strictclinical requirements are involved in designing this system like the Mechanicalparts must be serializable, movable, safe, fingers attachment setting, duration,and effective system having low cost profile.
ISBN:978-3-319-91334-6
Tárgyszavak:Műszaki tudományok Informatikai tudományok előadáskivonat
könyvrészlet
Megjelenés:Innovation, Engineering and Entrepreneurship / eds. José Machado, Filomena Soares, Germano Veiga. - p. 60-66. -
További szerzők:Afghan, Syeda Adila (1988-) (mérnök) Husi Géza (1962-) (gépészmérnök, mechatronikai mérnök, számítógépes tervezőmérnök)
Internet cím:DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

11.

001-es BibID:BIBFORM073529
Első szerző:Almusawi, Husam Abdulkareem (mérnök)
Cím:Recent trends in robotic systems for upper-limb stroke recovery: A low-cost hand and wrist rehabilitation device / Almusawi Husam AbdulKareem, Afghan Syeda Adila, Géza Husi
Dátum:2018
Megjegyzések:Over the years, hand rehabilitation devices have advanced drastically in terms of technological trends but due to the complex structure and intricateness of the human hands, it imposes a great difficulty on the development of an efficient hand rehabilitation devices. This paper demonstrates the trends and technologies associated with upper limb rehabilitation specifically for hand and wrist motion. The state of the art devices has been classified and categorized in terms of therapy, mechanical structure and control strategy. This paper gives an outlook regarding the various available robotic technological advancement in terms of mechanical design and followed by our own hand and wrist rehabilitation device along with its features.
ISBN:978-1-5386-4437-9
Tárgyszavak:Műszaki tudományok Villamosmérnöki tudományok előadáskivonat
könyvrészlet
Megjelenés:2nd International Symposium on Small-scale Intelligent Manufacturing Systems (SIMS), 2018. - p. 1-6. -
További szerzők:Afghan, Syeda Adila (1988-) (mérnök) Husi Géza (1962-) (gépészmérnök, mechatronikai mérnök, számítógépes tervezőmérnök)
Internet cím:DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

12.

001-es BibID:BIBFORM069595
Első szerző:Almusawi, Husam Abdulkareem (mérnök)
Cím:Technological advancements in stroke hand rehabilitation devices : a review / Husam Almusawi, Syeda Adila Afghan, Géza Husi
Dátum:2016
ISBN:978-963-449-016-6
Tárgyszavak:Műszaki tudományok Villamosmérnöki tudományok előadáskivonat
könyvrészlet
Megjelenés:Proceedings of 4th International Mechatronical Student Micro-Conference / eds. Adrienn Dineva, István Nagy. - p. 80-90. -
További szerzők:Afghan, Syeda Adila (1988-) (mérnök) Husi Géza (1962-) (gépészmérnök, mechatronikai mérnök, számítógépes tervezőmérnök)
Internet cím:Szerző által megadott URL
Intézményi repozitóriumban (DEA) tárolt változat
Borító:
Rekordok letöltése1 2