CCL

Összesen 1 találat.
#/oldal:
Részletezés:
Rendezés:

1.

001-es BibID:BIBFORM028372
Első szerző:Csernátony Zoltán (ortopéd sebész, traumatológus)
Cím:Biomechanical examination of the thoracic spine : the axial rotation moment and vertical loading capacity of the transverse process / Csernátony Z., Molnár Sz., Hunya Zs., Manó S., Kiss L.
Dátum:2011
ISSN:0736-0266
Megjegyzések:Our objective was to examine the load-bearing capacity of the transverse processes of human cadaveric thoracic vertebrae to vertical loads and axial rotation moments (i.e., moment applied in the transverse plane). A secondary objective was to examine the effect of the attached rib stumps. We wanted to demonstrate that the transverse process is durable enough to support the CAB hook ? a complementary hook to the CD system ? and can handle the vertical load or axial rotation moment during correction of scoliosis. We used 107 thoracic vertebrae removed from 10 cadavers. They were prepared in vertebral pairs, and were fixed into a material testingapparatus. Superoinferior vertical loads and axial rotation moments were applied to the transverse process using the CAB hooks at a rate of 30 mm/min and 8.58/s respectively until it fractured. We recorded 142 measurements, 99 were for vertical load and 43 for axialrotation moment. The average ultimate vertical load was 338 (SD ? 128) N and the average ultimate axial rotation moment was 14.4 (SD ? 4.52) Nm. The ultimate axial rotation moment for specimens with rib stumps attached was significantly greater than for specimens without rib stumps 15.9 (SD ? 4.1) Nm versus 12.5 (SD ? 4.4) Nm. Our results showed that both the vertical and axial rotationloading capability of the transverse process are large enough to withstand significant correctional forces, without fracture, through the CAB hooks.
Tárgyszavak:Orvostudományok Klinikai orvostudományok idegen nyelvű folyóiratközlemény külföldi lapban
thoracic spine
biomechanics
scoliosis
transverse process
CAB hook
Megjelenés:Journal Of Orthopaedic Research. - 29 : 12 (2011), p. 1904-1909. -
További szerzők:Molnár Szabolcs (1973-) (ortopéd sebész, traumatológus) Hunya Zsolt (1980-) (ortopéd és baleseti sebész) Manó Sándor (1977-) (gépészmérnök, számítógépes tervezőmérnök) Kiss László (1978-) (ortopéd sebész, traumatológus)
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:
Rekordok letöltése1