CCL

Összesen 3 találat.
#/oldal:
Részletezés:
Rendezés:

1.

001-es BibID:BIBFORM048575
Első szerző:Mankovits Tamás (gépészmérnök)
Cím:Titánhabok mechanikai tulajdonságai, áttekintés = Mechanical properties of titanium-foams, a review / Mankovits Tamás, Tóth László, Manó Sándor, Balogh Gábor, Csernátony Zoltán
Dátum:2013
Megjegyzések:Kétség kívül napjaink egyik legdinamikusabban fejlődő és legintenzívebben kutatott területe amechanikában az élő szervezetek numerikus szimulációja. Orvosi szempontból már szinte minden információrendelkezésre áll. A mérnökkutatók feladata az, hogy a valós viselkedést modellezzék. Ez komoly kihívás. Azemberi csont szivacsos szerkezete önmagában annak geometriai modelljének felépítését is jelentősenmegnehezíti. Az orvostudomány további fejlődéséhez rendkívül fontos, hogy a csontok és az ahhoz kapcsoltcsontpótló anyagok (pl. titánhab) hogyan viselkednek a valós életben. Jelen cikk egy áttekintést kíván nyújtani atitánhabok mechanikai jellemzőinek és numerikus anyagállandóinak meghatározására tett nemzetközikísérletekről. Today one of the most developing and intensively researched areas in mechanics is the numericalsimulation of organisms. Basically, in point of the medical view, almost all information is available. Engineershave the task to simulate that real behavior.There is no doubt it is a great challenge. According to the furtherdevelopment of the medical science it is necessary to be able to simulate the behavior of the human bone and thehigh-tech implants (for example titanium foam). This paper aims an international review of the titanium foamresearch, especially in the fields of mechanical properties determination and numerical simulation possibilities
ISBN:978-963-473-623-3
Tárgyszavak:Műszaki tudományok Gépészeti tudományok tanulmány, értekezés
titanium foam
titánhab
PTA hard surfacing
Ni-base hardfacing
Megjelenés:Proceedings of the 1st international scientific conference on advances in mechanical engineering (ISCAME 2013) : 10-11 October 2013, Debrecen, Hungary. / szerk. Mankovits Tamás. - p. 110-113. -
További szerzők:Tóth László Manó Sándor (1977-) (gépészmérnök, számítógépes tervezőmérnök) Balogh Gábor (1979-) (gépészmérnök) Csernátony Zoltán (1959-2023) (ortopéd sebész, traumatológus)
Internet cím:Szerző által megadott URL
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

2.

001-es BibID:BIBFORM048577
Első szerző:Manó Sándor (gépészmérnök, számítógépes tervezőmérnök)
Cím:Fémhabokból készült implantátumok = Implants made from metal foams / Manó Sándor, Tóth László, Mankovits Tamás, Balogh Gábor, Soltész István, Csernátony Zoltán
Dátum:2013
Megjegyzések:A mozgásszervi sebészetben alkalmazott implantátumok alapanyaga legtöbbször fém. Az orvos- ésanyagtudomány fejlődésével a kifejlesztett új fém alapanyagok egyre inkább megfeleltek az élő szervezetbe valóbeültetés speciális követelményinek. A napjainkban alkalmazott anyagok közül a titán és ötvözetei tekinthetőek alegideálisabb anyagoknak, amelyek tökéletes alapanyagul szolgálnak a csontbenövést serkentő porózusbevonatok és habos szerkezetű implantátumok elkészítéséhez. Közleményünkben statisztikai adatokkalalátámasztva megpróbáljuk megvilágítani a probléma nagyságát, illetve rövid áttekintést adunk a fémhabokmozgásszervi sebészetben történő alkalmazási formáiról. In most cases the materials of orthopaedic implants are different kinds of metal. Advancing of thematerial and medical sciences the newly developed metal implants meet the special criteria to implantation inthe human body better and better. Titanium and its alloys could be considered as the ideal one among today'smetal materials, that serve as a perfect base material for coatings and foams that stimulate bone ingrowth. Inour paper we try to enlighten the size of the problem supported by statistical data, furthermore we present ashort summary on the forms of actual application of metal foams in the surgery of the locomotor system.
ISBN:978-963-473-623-3
Tárgyszavak:Műszaki tudományok Gépészeti tudományok tanulmány, értekezés
titánhab
ortopédiai implantátum
titan foam
orthopaedic implants
Megjelenés:Proceedings of the 1st international scientific conference on advances in mechanical engineering (ISCAME 2013) : 10-11 October 2013, Debrecen, Hungary / szerk. Mankovits Tamás. - p. 114-119. -
További szerzők:Tóth László (1946-) (gépészmérnök) Mankovits Tamás (1981-) (gépészmérnök) Balogh Gábor (1979-) (gépészmérnök) Soltész István (ortopéd szakorvos) Csernátony Zoltán (1959-2023) (ortopéd sebész, traumatológus)
Internet cím:Szerző által megadott URL
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

3.

001-es BibID:BIBFORM113757
035-os BibID:(WoS)001113651800001 (Scopus)85175274528
Első szerző:Zhang, Lei (orvos)
Cím:Biomechanical Comparison of the Roof Step Cut Technique with the Bulk Bone Graft Technique During Total Hip Arthroplasty for Hip Dysplasia : a Finite Element Analysis / Lei Zhang, Rashwan Alkentar, Sándor Manó, János Szabó, Tamás Mankovits, Zoltán Csernátony
Dátum:2023
ISSN:0001-5415
Megjegyzések:PURPOSE OF THE STUDY Different techniques have been reported to reconstruct the deficient acetabulum during total hip arthroplasty (THA). The purpose of this study was to compare the biomechanical features of the bulk bone graft (BBG) technique (Harris acetabular plasty) and the Roof Step Cut (RSC) technique using finite element analysis. MATERIAL AND METHODS Based on a female patient's dysplastic hip CT scan, 3D models were assembled according to the two techniques. For the Harris technique, an irregular BBG was sculpted from a solid sphere, while for the RSC technique, the graft was sculpted into a step-cut shape with a similar size. Each graft was fixed with two compression screws at two different angles (0 degrees and 45 degrees). Four finite element models were used to compare the von Mises stress distribution and total deformation of the grafts and the screws. The pressure and sliding distances of the contacts between the bone graft, metal cup and acetabular host bone were also analyzed. RESULTS For both of the bone grafts and the screws, compared to the Harris models, the maximum stress of the RSC models was significantly lower (16.56 MPa, 25.50 MPa vs 97.13 MPa, 112.72 MPa) and the total deformation was significantly smaller (0.0096mm, 0.0089mm vs 0.022mm, 0.018 mm). 45 degrees inserted screws generated higher stress at the end of the screws and on the outside of the bone graft. In case of 0 degrees inserted screws, the maximum value was mainly located in the middle of the screws, inside the screw channel as well as at the contact area between the graft and the host bone. At all analyzed contacts, the RSC technique shows significantly lower pressure and sliding distances, irrelevant to the screw's insertion angle. In comparison, the model of BBG with 45 degrees screws showed a significant sliding effect and higher contact pressure. CONCLUSIONS Compared with the BBG technique, the step-shaped graft of the RSC technique could significantly reduce the maximum stress and deformation of the graft and the screws, and decrease the pressure and sliding distance between the bone graft, metal cup and the acetabular host bone. The angle of screw placement affects the location of stress and deformation.
Tárgyszavak:Orvostudományok Klinikai orvostudományok idegen nyelvű folyóiratközlemény külföldi lapban
folyóiratcikk
Megjelenés:Acta Chirurgiae Orthopaedicae et Traumatologiae Cechoslovaca. - 90 : 5 (2023), p. 301-313. -
További szerzők:Rashwan, Alkentar (1985-) (topology optimization) (mechanical engineer) Manó Sándor (1977-) (gépészmérnök, számítógépes tervezőmérnök) Szabó János (1966-) (ortopéd sebész) Mankovits Tamás (1981-) (gépészmérnök) Csernátony Zoltán (1959-2023) (ortopéd sebész, traumatológus)
Internet cím:DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:
Rekordok letöltése1