CCL

Összesen 4 találat.
#/oldal:
Részletezés:
Rendezés:

1.

001-es BibID:BIBFORM118765
Első szerző:Bodzás Sándor (okleveles gépészmérnök)
Cím:Determination of the Equivalent Stresses on the Tooth Root of a Helical Gear Pair by Manual And Computational Way / Sándor Bodzás, Tiba Zsolt
Dátum:2023
ISSN:1336-4472
Megjegyzések:A helical gear pair was designed that will be built into a gear box of a vehicle. The geometric design was made by MATLAB software. The computer aided design (CAD) was generated into the SolidWorks software. The assembly and the connection analysis were also made in this software. During the function of the gear pair the determination of the equivalent stress is important to inspect the pinion and the gear for tooth break. The selection of the appropriate material is also mandatory that can bear the prescribed load without tooth break. Considering the recommendation of the references the equivalent stresses were calculated for the pinion and the gear on the two sides of the tooth root. Finite element analysis was made due to the inspection of the correctness of the manual calculation process.
Tárgyszavak:Műszaki tudományok Gépészeti tudományok idegen nyelvű folyóiratközlemény külföldi lapban
folyóiratcikk
helical gear
stress
CAD
FEM
Megjelenés:Acta Facultatis Technicae Zvolen. - 28 : 1 (2023), p. 9-19. -
További szerzők:Tiba Zsolt (1965-) (gépészmérnök)
Pályázati támogatás:TKP2020-NKA-04
Egyéb
Internet cím:Szerző által megadott URL
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

2.

001-es BibID:BIBFORM105309
Első szerző:Bodzás Sándor (okleveles gépészmérnök)
Cím:Design and finite element analysis of planetary gear drives by the number of planet gears / Sándor Bodzás, Zsolt Tiba, Józef Menyhárt, Zsolt Békési, József Kertész
Dátum:2022
Megjegyzések: the aim of this study is the tooth contact analysis (TCA) of planetary gear drives in the function of the number of planet gears. We designed three types of planetary gear drives where the difference between the appliances are the number of planet gears. All of the other input geometric parameters were chosen for the same. The geometric design was done by the GearTeq software. After that the computer aided modelling (CAD) and the assembly could be done by SolidWorks software. Finite element analysis (FEM) was done on the tooth contact zone of the planet gear, the sun gear and the ring gear using of Ansys software. The normal stress and the normal deformation parameters were analyzed on the connection surfaces of the pinion (sun gear and planet gear) and the gear (planet gear and ring gear).
ISBN:9786156032577
Tárgyszavak:Műszaki tudományok Gépészeti tudományok előadáskivonat
könyvrészlet
planet gear
planetary gear drive
stress
deformation
CAD
FEM
Megjelenés:Műszaki tudomány az Észak-kelet-Magyarországi régióban 2022 / szerk. Páy Gábor. - p. 126-131. -
További szerzők:Tiba Zsolt (1965-) (gépészmérnök) Menyhárt József (1988-) (gépészmérnök, létesítménymérnök, lean szakmérnök) Békési Zsolt (1988-) (gépészmérnök) Kertész József (1990-) (járműmérnök)
Pályázati támogatás:2020-4.1.1-TKP2020
egyéb
Internet cím:Szerző által megadott URL
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

3.

001-es BibID:BIBFORM102374
Első szerző:Bodzás Sándor (okleveles gépészmérnök)
Cím:Fogaskerék bolygóművek tervezése és végeselem vizsgálata a bolygókerekek számának függvényében / Bodzás Sándor, Tiba Zsolt, Menyhárt József, Békési Zsolt, Kertész József
Dátum:2022
ISBN:978-615-6032-50-8
Tárgyszavak:Műszaki tudományok Gépészeti tudományok előadáskivonat
könyvrészlet
Megjelenés:Műszaki tudomány az észak-kelet magyarországi régióban 2022 : konferencia előadások kivonatai / szerk. Kocsis Imre, Dezső Gergely. - p. 32. -
További szerzők:Tiba Zsolt (1965-) (gépészmérnök) Menyhárt József (1988-) (gépészmérnök, létesítménymérnök, lean szakmérnök) Békési Zsolt (1988-) (gépészmérnök) Kertész József (1990-) (járműmérnök)
Internet cím:Intézményi repozitóriumban (DEA) tárolt változat
Borító:

4.

001-es BibID:BIBFORM102194
Első szerző:Bodzás Sándor (okleveles gépészmérnök)
Cím:Redesign of a Volkswagen Crafter vehicle to a hybrid vehicle having e-motor and diesel engine / Sándor Bodzás, Zsolt Tiba, Piroska Ailer, Géza Husi
Dátum:2022
ISSN:1757-8981 1757-899X
Tárgyszavak:Műszaki tudományok Gépészeti tudományok idegen nyelvű folyóiratközlemény külföldi lapban
folyóiratcikk
Megjelenés:IOP Conference Series: Materials Science and Engineering. - 1237 : 1 (2022), p. 1-6. -
További szerzők:Tiba Zsolt (1965-) (gépészmérnök) Ailer Piroska Gyöngyi Husi Géza (1962-) (gépészmérnök, mechatronikai mérnök, számítógépes tervezőmérnök)
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:
Rekordok letöltése1