CCL

Összesen 1 találat.
#/oldal:
Részletezés:
Rendezés:

1.

001-es BibID:BIBFORM123961
035-os BibID:(WOS)001287238100001 (Scopus)85200723223
Első szerző:Baranyai Dávid
Cím:Module Tester for Positron Emission Tomography and Particle Physics / David Baranyai, Stefan Oniga, Balazs Gyongyosi, Balazs Ujvari, Attia Mohamed
Dátum:2024
ISSN:2079-9292
Megjegyzések:The combination of high-density, high-time-resolution inorganic scintillation crystals such as Lutetium Yttrium Oxyorthosilicate (LYSO), Yttrium Orthosilicate (YSO) and Bismuth Germanate (BGO) with Silicon Photomultiplier (SiPM) sensors is widely employed in medical imaging, particularly in Positron Emission Tomography (PET), as well as in modern particle physics detectors for precisely timing sub-detectors and calorimeters. During the assembly of each module, following individual component testing, the crystals and SiPMs are bonded together using optical glue and enclosed in a light-tight, temperature-controlled cooling box. After integration with the readout electronics, the bonding is initially tested. The final readout electronics typically comprise Application-Specific Integrated Circuits (ASICs) or low-power Analog-to-Digital Converters (ADCs) and amplifiers, designed not to heat up the temperature-sensitive SiPM sensors. However, these setups are not optimal for testing the optical bonding. Specific setups were developed to test the LYSO + SiPM modules that are already bonded but not enclosed in a box. Through large data collection, small deviations in bonding can be detected if the SiPMs and LYSOs have been thoroughly tested before our measurement. The Monte Carlo simulations we used to study how parameters?which are difficult to measure in the laboratory (LYSO absorption length, refractive index of the coating)?affect the final result. Our setups for particle physics and PET applications are already in use by research institutes and industrial partners.
Tárgyszavak:Természettudományok Fizikai tudományok beszámoló
folyóiratcikk
SiPM
FPGA
PET
particle physics
Megjelenés:Electronics (Switzerland). - 13 : 15 (2024), p. 1-15. -
További szerzők:Oniga István László (1960-) (villamosmérnök) Gyöngyösi Balázs Ujvári Balázs (1977-) (fizikus) Mohamed, Attia
Pályázati támogatás:OTKA131991
OTKA
OTKA143540
OTKA
NKFIH 2021-4.1.2-NEMZ_KI-2022-00022
Egyéb
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:
Rekordok letöltése1