CCL

Összesen 4 találat.
#/oldal:
Részletezés:
Rendezés:

1.

001-es BibID:BIBFORM112377
Első szerző:Harasztosi Lajos (villamosmérnök)
Cím:Temperature Calibration of Twin Micro-heater Based Microcalorimeter / Lajos Harasztosi, István A. Szabó, Ferenc Biró, Rebeka Gy. Kiss, Gábor Battistig
Dátum:2023
ISSN:2306-8515 1726-5479
Megjegyzések:Calorimetry is often used as a material characterization method but needs large amounts of materials to be studied. Determination of reaction heat provides important information about the physical processes that take place during heating up the samples. Recently, the application of solid thin film structures became more important in various fields of surface sciences, microelectronics, coatings, etc. Microcalorimetry is an effective tool for investigating various thin film reactions. The volume of the materials needed for the measurements are limited. New micro-electromechanical membrane type silicon chip of twin micro heaters, electrical control system and temperature calibration method is developed and presented in this paper. The large temperature homogeneity of the heaters, the small volume of material needed for the studies and the sophisticated analog electronics provides a high-quality differential scanning calorimetry signal.
Tárgyszavak:Természettudományok Fizikai tudományok idegen nyelvű folyóiratközlemény külföldi lapban
folyóiratcikk
microcalorimetry
MEMS membrane structure
microheaters
signal processing
temperature feedback and control
Megjelenés:Sensor and Transducers. - 260 : 1 (2023), p. 7-13. -
További szerzők:Szabó István András (1956-) (fizikus) Bíró Ferenc (mikrotechnológia) Kiss Rebeka Gyöngyi (1997-) (villamosmérnök) Battistig Gábor Kornél (1957-) (villamosmérnök)
Pályázati támogatás:TKP-2019-21
Egyéb
TKP2021-NVA-03
Egyéb
Internet cím:Szerző által megadott URL
Intézményi repozitóriumban (DEA) tárolt változat
Borító:

2.

001-es BibID:BIBFORM107821
Első szerző:Harasztosi Lajos (villamosmérnök)
Cím:Microcalorimeter Development and Calibration Based on a Twin Micro-heater Platform / L. Harasztosi, I. A. Szabó, F. Biró, R. Gy. Kiss, G. Battistig
Dátum:2022
ISBN:9788409438549
Tárgyszavak:Természettudományok Fizikai tudományok előadáskivonat
könyvrészlet
Megjelenés:8th International Conference on Sensors Engineering and Electronics Instrumentation Advances (SEIA' 2022). - p. 112-116. -
További szerzők:Szabó István András (1956-) (fizikus) Bíró Ferenc (mikrotechnológia) Kiss Rebeka Gyöngyi (1997-) (villamosmérnök) Battistig Gábor Kornél (1957-) (villamosmérnök)
Pályázati támogatás:TKP-2019-21
egyéb
TKP2021-NVA-03
egyéb
Internet cím:Intézményi repozitóriumban (DEA) tárolt változat
Borító:

3.

001-es BibID:BIBFORM114312
035-os BibID:(Scopus)85165539361 (cikkazonosító)10168448
Első szerző:Harasztosi Tamás
Cím:Development and application of a wireless, in body data acquisition system for observation of experimental rabbit's bone healing / Tamás Harasztosi, Tamás Bazsó, Rebeka Kiss, Zoltán Csernátony, Petra Harasztosi, Lajos Daróczi, Lajos Harasztosi
Dátum:2023
Megjegyzések:A wireless electronic measuring and data collection system was developed for live animal experiments. The measurement unit was implanted under the skin of the experimental animal during surgery. During the bone healing process, the galvanic voltage between the installed screws, the temperature, the acceleration of the animal and the voltage of the installed battery were measured and recorded. Using the measured and transmitted data, makes it possible to monitor the bone healing process of the experimental animal. We present here the detailed description of the whole measurement system, and some results of the measured data.
ISBN:9798350334845
Tárgyszavak:Természettudományok Fizikai tudományok előadáskivonat
könyvrészlet
Temperature measurement
Wireless communication
Temperature sensors
Voltage measurement
Animals
Surgery
Bones
Megjelenés:46th International Spring Seminar on Electronics Technology (ISSE)/ ed. Bogdan Mihăilescu, Cristina Marghescu, Heinz Wohlrabe, Tomas Blecha, Aurel Gontean. - p. 1-4. -
További szerzők:Bazsó Tamás (1974-) (ortopéd sebész) Kiss Rebeka Gyöngyi (1997-) (villamosmérnök) Csernátony Zoltán (1959-2023) (ortopéd sebész, traumatológus) Harasztosi Petra Daróczi Lajos (1965-) (fizikus) Harasztosi Lajos (1962-) (villamosmérnök)
Pályázati támogatás:K-125409
Egyéb
Internet cím:Intézményi repozitóriumban (DEA) tárolt változat
DOI
Borító:

4.

001-es BibID:BIBFORM115834
035-os BibID:(Scopus)85165537127
Első szerző:Kiss Rebeka Gyöngyi (villamosmérnök)
Cím:Development of Educational Materials for an Electrical Manufacturing Laboratory / Rebeka Gyöngyi Kiss, Lajos Harasztosi, Gábor Battistig
Dátum:2023
Megjegyzések:The paper introduces the newly installed electrical manufacturing prototype production line used for educational purposes in the Electrical Technology course at the University of Debrecen. The paper aims to show the importance of practical education through the developed educational materials for the Electrical Technology course. The paper aims to explore practical education as a method of effectively teaching electronic product design and manufacturing to provide students with an experiential learning experience in a real-world, prototype production line environment.
ISBN:9798350334845
Tárgyszavak:Műszaki tudományok Villamosmérnöki tudományok előadáskivonat
könyvrészlet
education
electrical manufacturing
prototype production
educational material development
Megjelenés:46th International Spring Seminar on Electronics Technology (ISSE)/ ed. Bogdan Mihăilescu, Cristina Marghescu, Heinz Wohlrabe, Tomas Blecha, Aurel Gontean. - p. 1-4. -
További szerzők:Harasztosi Lajos (1962-) (villamosmérnök) Battistig Gábor Kornél (1957-) (villamosmérnök)
Pályázati támogatás:TKP2020-NKA-04
Egyéb
2020-4.1.1-TKP2020
Egyéb
Internet cím:Szerző által megadott URL
DOI
Intézményi repozitóriumban (DEA) tárolt változat
Borító:
Rekordok letöltése1